The Wifi socket generally needs to be connected to the home Wi-Fi in order to use, and the device needs to be paired. The Wifi socket is an intelligent home device that can control functions such as electrical switches and switches through terminals such as mobile phones, so it needs to be connected to the home Wi-Fi network.
Before using the device, you need to pair the device.
Specific pairing operation can refer to the Wifi socket instruction manual, usually need to download the corresponding APP, and then follow the instructions for connection and configuration.
During the pairing process, make sure that the socket and phone are on the same Wi-Fi network and that the password is correct.
After the pairing is successful, you can control the switch and timing of the socket through the mobile phone and other terminals.
At the same time, pay attention to the installation and use of the socket to ensure the safety of use.
The Wifi socket pairing method is to ensure that the socket has been connected to the power supply, open the Wifi setting of the phone, connect the Wifi hotspot of the socket, and then open the corresponding APP for pairing operation.
This method is because the Wifi socket needs to be connected using a Wifi signal, and we need to make sure that the phone is connected to the Wifi hotspot of the socket in order to pair.
In addition, when pairing, you need to follow the process of the APP, such as entering the Wifi account password and other information.
After we complete the pairing operation, we can control the switch and timing of the socket through the APP, which is convenient for us to use electrical appliances at home.
The connection method is as follows
1. Install the socket WiFi version on the AC plug board. When the socket shows a yellow light, it is in pairing mode.
2. Open the brand APP corresponding to the socket on the mobile phone, click the \"\" button in the upper right corner of the home page to add the socket.
3. Put the phone close to the socket, select the name of the WiFi you want to access in the setting screen, and enter the password.
4, socket WiFi version indicator light is blue steady on, that is, the pairing is successful, you can plug in the device to use.