If your coffee maker asks you to fill the water tank for cleaning, you can follow these steps:
< br >
1. First, turn off the power to the coffee machine and wait for it to cool.
2. Open the water tank cover of the coffee maker and empty the water tank.
3. Clean the water tank with clean water to ensure that the inner wall of the tank is clean and free of impurities.
4. Fill the tank with clean water to ensure that the water level is below the highest water level of the tank.
5. Close the water tank cover, turn on the power supply of the coffee machine, and follow the instructions of the coffee machine to operate.
< br >
In addition, if the coffee machine prompts to clean the water tank, please fill the water frequency is relatively high, it is recommended that you pay attention to keep the water level in the water tank not lower than the minimum water level when you usually use the coffee machine, so as to avoid frequent occurrence
Tips for cleaning the tank.
Clean the water tank in time and fill up the water to solve the problem
Coffee machine tip Cleaning the water tank may be because the water in the water tank has been used up or old and dirty, at this time, you need to first empty the old water in the water tank, and then fill up the clean water, thoroughly clean the water tank
In addition, in order to avoid the coffee machine prompt cleaning the water tank frequently, Usually use the coffee machine should be timely clean filter, steam pipe and other additional parts, to ensure that each time before the use of coffee fresh water, which can extend the service life of the coffee machine and improve the taste of the coffee
I think so, in response to the question that the coffee machine asks you to fill the water tank, I would like to answer you
Open the tank lid of the coffee maker and remove the tank from the inside of the coffee maker.
? Pour the stirred detergent into the tank to clean.
one
Ensure that the drain outlet of the drainage chamber is clean and the drainage cover is completely free of oil. If there is oil, clean it in time.
two
Open the tank cover and fill the tank with clean water. Tip: Keep the water level does not exceed the upper limit line, and the filling amount is controlled within 75% of the maximum volume.
three
Close the water tank cover, connect the power plug, turn on the power supply of the coffee machine, and use the \"Clean water tank\" function to clean. Tip: Do not unplug the tank during cleaning, otherwise the task will be cancelled.
four
After the task is completed, turn off the power, remove the water tank and discharge the cleaning agent, and finally repeat the second step to complete the cleaning work of the Calami coffee machine.
1, the flow meter may be blocked or damaged, the water of the coffee machine tank can not enter the internal pipeline of the machine, the coffee machine will automatically prompt \"system water shortage\".
< br >
2, the flow meter and motherboard connection damage will also lead to the coffee machine prompt \"system water shortage\
< br >
Damage to the main control board requires professional treatment, repair or replacement of the main control board (drive board).
< br >
Coffee machine water after the flow meter into the water pump, if the pipe between falling off or damaged, water or can not enter the internal pipe of the machine, this is the need to disassemble, repair or replace the pump and flow meter connection pipe.