Wireless charging in the end so, in the convenient at the same time can meet our needs? Here to share with you!
Methods\/Steps
1, through the network to buy a set of receiver and charger, because in order to be accurate, the purchase of two interfaces, one is an ordinary Android interface, one is a new tpc interface.
< br \/ >
2. Launch the charger.
< br \/ >
3. Receiving coil.
< br \/ >
4, according to the seller's instructions the charger charging period is 2A, the output is 1A, plug in the Android phone, the test charger current is 1.1A, between the receiver and the phone can not be tested only from the charging time, usually charged 1A current can be full for 3 hours, wireless for more than 6 hours, and the heat is very heavy, about 50 degrees! It is estimated that the wireless receiver output is about 400-500mA.
< br \/ >
5, continue to test another mobile phone, the maximum charging current is also 1.1A, but this mobile phone has a fast charging function, if the charging current is enough to reach the maximum current of 2A. However, our wireless charging does not have 2A, or 1A, so it is concluded that the maximum current is only 1A, not 2A as said by the seller, and the received current conversion is only the maximum 500mA without 1A.
< br \/ >
6, summarize the advantages: wireless convenient, do not need to plug frequently, take at will.
< br \/ >
7, summarize the shortcomings: slow charging, a long time are dissatisfied, heavy heat, has an impact on the battery! Occupy the interface for a long time, the data line is inconvenient.
1, through the network to buy a set of receiver and charger, because in order to be accurate, the purchase of two interfaces, one is an ordinary Android interface, one is a new tpc interface.
2. Launch the charger.
3. Receiving coil.
4, according to the seller's instructions the charger charging period is 2A, the output is 1A, plug in the Android phone, the test charger current is 1.1A, between the receiver and the phone can not be tested only from the charging time, usually charged 1A current can be full for 3 hours, wireless for more than 6 hours, and the heat is very heavy, about 50 degrees! It is estimated that the wireless receiver output is about 400-500mA.
5, continue to test another mobile phone, the maximum charging current is also 1.1A, but this mobile phone has a fast charging function, if the charging current is enough to reach the maximum current of 2A. However, our wireless charging does not have 2A, or 1A, so it is concluded that the maximum current is only 1A, not 2A as said by the seller, and the received current conversion is only the maximum 500mA without 1A.