OPPO's standard VOOC flash charger adapter and VOOC flash charger data cable must be used at the same time, otherwise it cannot enter the flash charger; Mobile phone does not flash charge, may be related to the following reasons:
< br \/ >
1, when the battery temperature is lower than 15 degrees or higher than 43 degrees can not flash charge, because the battery is more sensitive to temperature, at low or high temperature is not suitable for high current charging, learn more;
< br \/ >
2, in order to ensure battery life, when the battery power is higher than 85%, it will automatically switch to ordinary charging mode, and it is normal to stop flash charging at this time;
< br \/ >
3, must use OPPO standard VOOC flash charge adapter and VOOC flash charge data cable at the same time, otherwise can not enter the flash charge;
< br \/ >
4, when the flash charge data cable and the adapter or mobile phone contact is not good, it will not enter the flash charge. If you encounter the failure to enter the flash charge caused by the above conditions, it is recommended that you :1, unplug the adapter from the power socket for at least one minute to allow the adapter to discharge completely; 2, long press the phone power button at least 10s to restart the phone or unplug the battery and then plug in the battery to start; 3. Check that the data cable is in good contact with the phone and adapter; 4, re-charge to see if you can restart the flash charge, if the completion of the above operations still can not flash charge, please go to the customer service center for testing.
The causes and troubleshooting methods are as follows
,,,
< br >
1. The screen brightness is too high
< br >
Generally, the higher the brightness setting of the mobile phone, the more power consumption.
< br >
2. Bluetooth, GPS, WiFi and data connection are enabled.
< br >
3. You use your phone too often
< br >
The more frequently a phone is used, the faster it drains power. Especially now smart phones, we are almost always concerned about the use of mobile phones
Solution Remove the above faults to solve the problem
Possible reasons for no flash charge: 1. Use a non-standard VOOC flash charge adapter\/data cable.
2. When inserting the fast charge adapter, the battery temperature is lower than 15 degrees or higher than 43 degrees. It cannot enter the flash charge.
3. Generally, the flash charge is about 90% and the flash charge becomes ordinary charging.
4 The charger contact is not good, you can re-plug the charger to try.
1. The battery is in poor contact with the mobile phone. The battery can be removed and reinstalled, and using a clean cloth, wipe the battery and the battery connection metal points.
2. If the battery cannot be removed, check whether the software version is faulty. Ensure that the mobile phone software version is the latest version.
3. If the battery temperature is lower than or beyond the normal temperature range, it will be in the normal charging mode to ensure safety. When the temperature is between 15 degrees and 45 degrees, the phone will be in flash charge mode.
4. Intermittent charging problems caused by poor socket contact. Replaceable charging position.
5. Check the phone charging port for foreign objects. If there is liquid or debris resulting in poor contact between the mobile phone charging interface and the charger, it is necessary to go to the local customer service center as soon as possible for testing and repair.
It's broken. It's for inspection. It's for after-sale testing