Can not be charged, first divided into three situations:
1, in the case of electricity into the water;
2, in the case of power failure into the non-corrosive liquid;
(3) Fall into non-clean water when energized, or fall into corrosive liquid or viscous liquid or other unclean liquid regardless of whether energized.
Here are some suggestions for each situation:
First, in the case of electricity into the water, this situation generally does not need to disassemble the machine.
Power down as soon as possible.
2. Place the lamp, spotlight and other light heat source to let the water slowly disperse. The process takes more than six hours. Do not rush to use strong heat sources such as hair dryers.
After this treatment, the power supply can basically work normally.
2. Fall into non-corrosive liquid in the case of power failure.
Shake it dry, but don't shake the machine off.
2. If there is no trace on the LCD screen, handle it according to item 3 of the first point.
3. If there is something left on the screen and it is very serious, do not press the first point, article 3, because the electronic circuit after this treatment can work normally, but the screen may be ugly. It can be sent to the nearest maintenance department for processing or disassemble the machine by yourself. (Poor hands-on ability or to professional repair it)
(3) Fall into non-clean water when energized, or fall into corrosive liquid or viscous liquid or other partially clean liquid whether energized or not.
Power off as soon as possible
2. If it falls into corrosive liquid (such as sea water), immediately rinse the machine with clean water. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.
3. Disassemble the machine as soon as possible. But take it slow when you're taking it apart.
4. Clean with alcohol or professional washer water.
5. Assemble. Or take it all to a maintenance facility. Let the repair station clean and assemble again.
considerations
1, after the mobile phone water, do not shake hard (water is flowing will also get water in the place without water).
2, when blowing the air duct can not be opened to the maximum temperature at once, high temperature hot air will cause damage to the LCD screen.
3, the water is more serious and the water time is longer, it needs to be dismantled, I think ordinary users should not have the ability, or obediently sent to the customer service there.