If your mobile phone supports flash charge, charging with the original charger in the temperature range of 15 ° C -35 ° C, it is found that it cannot flash charge, the following situations may exist:1. Check that the data cable is in good contact with the phone and adapter;2. Unplug the adapter from the power socket for at least one minute before connecting the phone to charge;3. Restart the phone, and then connect the charger for charging;If you still cannot flash charge after completing the above operations, take the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing.VOOC flash charge is OPPO's independent research and development of fast charging technology, and applied for 18 patents, the fastest charging speed increased by more than 4 times, and has impeccable intelligent all-end five-level protection, is the world's fastest and safest mobile phone charging technology.VOOC flash charge was first used on OPPO Find 7. As a 3,000mah battery OPPO Find 7, with the VOOC flash charge, you can charge 5 minutes to make a call for 2 hours, and the phone's charge can be directly charged to 75% in 30 minutes - which is enough power for most people to use for a whole day. (This data is based on laboratory testing in specific environments. The actual charging effect may vary due to factors such as battery capacity and temperature, and the actual talk time may vary according to the phone's use status and use environment.
In this case, do you consider whether the battery voltage is too low to replace it? This is the problem of the charger replacement treatment is completely no problem, replace the use
Method 1:
This is because the battery voltage of the mobile phone is too low, and it needs a low voltage period of time. Low battery may cause poor contact of the charging port. You can take off the charging cable for five minutes, connect the charger and charge for more than half an hour. In the process of connecting the charger to charge, the mobile phone LED may not be bright initially, after a few minutes, the red light of the LED began to blink and faster and faster, when the red light is no longer blinking and it can be turned on.
Method 2:
It may be due to the loose charging interface or cable port, resulting in the current is easily blocked by external factors, resulting in poor contact, it is necessary to check whether the data cable and jack are damaged or loose.
Method 3:
If the line and the head are not unified brands, it will lead to poor coordination between them, so the charging contact is poor. Can be charged using the original data cable.
Method 4:
If the problem persists, it is recommended to back up the data in the phone, such as contacts and SMS messages, and restore the phone to factory Settings. Find the restore factory Settings in the system \"More\" of the phone Settings, and do not select \"Clear Completely\". If it still cannot be repaired, please go to the nearest maintenance station as soon as possible to check the repair.