< br >
1. Cut two earphones and weld two lotus plugs.
2, two lotus plugs are inserted into the audio input lotus socket of the stereo, it is good.
This method needs to damage the Bluetooth headset, there is another way, is not to use the Bluetooth headset, and add a Bluetooth receiver to connect with the power amplifier, the method is as follows:
1, go to a treasure to buy a Bluetooth receiver (only a few dollars
The Bluetooth receiver is powered by a cell phone battery.
2. Fix the Bluetooth receiver and micro switch on the battery with stick glue.
3. Use a headset plug to turn the lotus plug audio cable and connect the Bluetooth receiver with the input lotus socket of the power amplifier.
4, use the mobile phone Bluetooth function to connect the Bluetooth receiver, and then search, pair, and connect successfully, you can use the mobile phone to control the audio. It's convenient and practical.
5, you can charge the battery from the USB end of the Bluetooth receiver, when charging, you need to open the control switch, otherwise you can not charge.
You can't connect Bluetooth headphones directly because the speaker is an audio output device, and the Bluetooth headset is a device that receives audio, and there is no direct connection between them.
If you want your amp to work with a Bluetooth headset, you need to use a Bluetooth repeater.
Bluetooth repeater is an intermediate device that can send the audio signal of the amplifier to the Bluetooth headset through Bluetooth to achieve wireless transmission.
It should be noted that when using a Bluetooth repeater, it is necessary to ensure that the repeater supports the corresponding Bluetooth protocol, and pay attention to the connection mode between the repeater and the amplifier, which can generally be connected using a 3.5mm audio cable or optical fiber cable.