1, the refrigerator has just entered the door, the first thing to consider the reasonable position of the refrigerator, reserve 5 to 10CM on both sides of the refrigerator, reserve more than 10CM above, and reserve more than 10CM on the back side, so that the position can help the refrigerator better heat dissipation. Otherwise, if it is too close, the heat of the refrigerator will be hoarded together, which is not conducive to the maintenance of the refrigerator.
2, before use, we must first carefully read the refrigerator instructions, check the refrigerator accessories are not complete. Under normal circumstances, the power supply used by the refrigerator is generally 220V, 50Hz single-phase AC power supply, if the voltage is very large or high and low, it is likely to affect the normal operation of the compressor, resulting in the burning of the compressor.
3, the refrigerator socket is single-phase three-hole, separate wiring. Pay attention to protect the insulation layer of the power cord, the wire can not be heavy, if unauthorized modification or extension of the power cord, it is likely to bring family hazards.
4, when the above steps are OK, do not plug in immediately. To stand at least 2 hours before starting, to prevent oil circuit failure (after handling the refrigerator). After the power supply is turned on, listen carefully to the sound of the compressor when starting and running is normal, is there a sound of pipeline hitting each other, if the noise is too large, check whether the product is placed smoothly, whether the various pipelines are touched, and make corresponding adjustments. If there is a large abnormal sound, the power supply should be cut off immediately and contact professional repair personnel.
5, because the moving parts of the new machine have the running-in process, so we have to run the load off when we start to use, and wait until the operation is increased after a period of time, which can extend the life of the refrigerator.
6, at the beginning of the use of the refrigerator, the food can not be too full, to leave appropriate space, not to let the refrigerator load operation. Hot food can not be directly put into the refrigerator to prevent long-term uninterrupted. Note that it is best not to put glassware in the freezer to prevent freezing damage. Do not put volatile, flammable chemicals, corrosive acids and alkalis into the refrigerator to prevent damage.
1, before the adjustment, check the manual, understand the relevant knowledge of the temperature adjustment controller, and adjust it in the correct way.
< br >
2, open the door, check the position of the refrigerator controller, the refrigerator temperature control knob are marked with numbers, the larger the number, the higher the control temperature. The indication range of temperature controller in different seasons is: summer 2 ~ 3; Spring and autumn 3 ~ 4; Winter 4-5. When the room temperature is below 10°C, the thermostat should be set to " 6 & # 34; The location of. \"7\" stands for quick-freezing.
< br >
3, the 0 gear belongs to the stop gear, the temperature controller is adjusted to this gear, usually the refrigerator will stop cooling.
< br >
4, according to their own needs to adjust, usually the middle is the most appropriate.
< br >
5, after adjustment, check the effect, if as expected, no need to continue to adjust, on the contrary, you need to adjust to the right so far.