1. Find the power switch. When you first touch the projector, the first thing you need to know is where the power switch is.
< br >
2. Connect the power cable. After finding the switch, it is necessary to connect the power cord before using the projector, pay attention to the power cord is a little too much, step by step, do not open the power switch when connecting the power cord.
< br >
3. Connect the computer to the projector. After connecting the computer to the projector connector with the power cable, tighten the two small screws on the cable.
< br >
4. Turn on the power. After all the power cables are connected, turn on the projector switch and the computer power switch.
< br >
5, if after opening, encounter the projector can not connect to the computer, is not to switch the screen content in the past. At this time, press Fn F8 on the keyboard (some computers are F5, in short, look at the display icon operation on the key), you can switch several times.
< br >
6. Projector imaging correction. After the screen content is projected onto the projection cloth, the position and size of the projection should be corrected. The position of the projection is adjusted by the two screw knobs below. When adjusting the image, the projection cloth shall prevail.
< br >
7. Focus the projector. Due to the placement of the projector, it is also necessary to focus the projected image. If the focus does not achieve the effect can also consider moving the position of the projection.
The L8 Cube Intelligent Projector is a portable projector with multiple functions. Here are the general steps to use the L8 Cube Projector:
< br >
1. Turn on the power: Connect the power plug to the power socket, press the power switch, and wait for the smart projector to start.
< br >
2. Connect the input device: Connect the device you want to project (such as computer, mobile phone, tablet, etc.) to the L8 Rubik's Cube intelligent projector through HDMI cable or wireless connection (such as Airplay or Miracast), and wait for recognition and connection success.
< br >
3. Adjust the focus: By rotating the lens or using the focus button on the remote control, adjust the lens position to get a clear image. You can adjust the zoom in or out as needed to fit your projection environment.
< br >
4. Operation menu: Use the projector menu to set and operate. You can open the menu with a button on the remote control or projector and select the desired features and Settings options.
< br >
5. Start the projection: After you have set all the parameters, you can start the projection. You can see the image or video you want projected on a white wall or on a special screen.