Agreed.
1, according to the stamping process and stamping theory, the thickness of the stamping part is not only related to the model of the punching machine, but also related to the mold and material used. 2, according to the relevant data, 40 tons of punching machine can press aluminum alloy thickness of 1mm, and 3mm thick punching parts are relatively thin, and can achieve the corresponding punching ratio, so it can be concluded that 40 tons of punching machine can punch down 146 mm of 3 thick punching parts.
3, However, the specific pressing effect also needs to consider the mold and the shape of the stamping parts and other details.
Agreed.
1. According to the specifications and parameters of the punching machine, a punching machine of 40 tons can provide enough pressure to impact the material of this thickness. At the same time, the length of 146 mm is not too long, so the press can cope with this length. 3. In addition, the premise is that the material should meet the requirements, and the accessories and punches of the press also need to be able to match the material of this thickness.
Can't go down. Because the punching pressure of the punching machine is related to the thickness, hardness, shape and other factors of the material, the pressure of the 40 tons punching machine is not enough to punch down the 3 thick materials of 146 mm.
In addition, it is also necessary to consider whether the mold of the punch is suitable for the shape and size of the material.
In the stamping process, it is necessary to choose the appropriate punch and die according to the nature and requirements of the material to ensure the processing effect and quality.
At the same time, it is also necessary to pay attention to safety issues to avoid accidents.
According to the size calculation can be washed down 146 mm thickness of 3 mm sheet.