The intermittent charging of Redmi k30 mobile phone may be caused by the following reasons:
1. The charging head or cable is in poor contact or damaged. When trying to replace a new charging head or cable, or inserting it into the device, make sure that the contact is good and do not shake or move the charger.
2. Aging cell phone batteries. If your phone battery has been used for a while, the battery life may have expired, resulting in longer or unstable charging times. Try replacing the battery with a new one or contact the manufacturer for repair.
3. The software or hardware of the mobile phone is faulty. If these two conditions are not the cause of the problem, then your phone may have a software or hardware problem. Try to restore the phone to factory Settings or contact the manufacturer for repair.
Please note that in order to ensure safety, incompatible charging heads and charging cables should be avoided whenever possible. If the problem cannot be solved, consult the phone manufacturer or repair organization for support.
The reason why the charge is broken for a while may be that there is a problem with the charging cable or the charger.
First, you can try to replace the charging cable or charger to see if you can solve the problem. Secondly, it may be that the inside of the charging port is dirty or oxidized, and it needs to be cleaned.
Finally, there may also be a problem with the phone battery and the battery needs to be replaced. In short, the problem of charging for a while needs to be carefully investigated to avoid more serious damage.
If the Redmi K30 mobile phone is intermittent when charging, it may be one of the following reasons:
< br >
1. The charging port is dirty or loose. Clean or replace the charging port.
< br >
2. The charger is in poor contact. Replace the charger or check the charging cable.
< br >
3. The rechargeable battery is aging or damaged and needs to be replaced.
< br >
4. The mobile phone system is faulty. Restart the mobile phone or clear the cache.
< br >
If the above methods are ineffective, it is recommended to find a professional to repair or replace. Pay attention to the use of mobile phone charging, use the original charger and cable, avoid the use of fake and shoddy products. In addition, if the phone is overheated or strange for a long time, it needs to stop charging and be repaired.
Mobile phone charging and breaking may be poor contact of the charging head, you can change a charger to try to see if this problem will occur.
< br >
If it is not solved, then there may be a problem with the phone, it is recommended to check the charging port to see if there is a foreign body blockage.
< br >
If the charging port has not been restored, there may be a problem with the hardware in the phone, and it is recommended to carry the phone to the after-sales service center for testing and maintenance.
The answer is as follows: It may be caused by the following reasons:
1. Charger problem: Try to change a different charger to ensure that the charger can work properly.
2. Charging cable problem: Try to replace a different charging cable to ensure that the charging cable can work properly.
3. Charging port problem: Check whether there is foreign matter or dust in the charging port of the phone, and clean it up if there is.
4. Battery problems: It may be that the battery life is up and the battery needs to be replaced.
If the above methods cannot solve the problem, it is recommended to contact after-sales service or professional maintenance personnel for maintenance.
one
Mobile phone charging will be broken because of the poor contact of the data cable or charging head, you can check whether the data cable or charging head is loose or damaged, check the mobile phone charging interface, the power supply is intact, can replace the power supply try.
two
Plug output voltage, current is not enough, which is determined according to the principle of charging, must be high voltage flow to low voltage, mobile phone is generally 3.7V, produce high voltage flow to low voltage, charging, but if the plug voltage is not enough, it will be intermittent.