OPPO's standard VOOC flash charger adapter and VOOC flash charger data cable must be used at the same time, otherwise it cannot enter the flash charger; Mobile phone does not flash charge, may be related to the following reasons:
< br >
< br >
1, when the battery temperature is lower than 15 degrees or higher than 43 degrees can not flash charge, because the battery is more sensitive to temperature, at low or high temperature is not suitable for high current charging, learn more;
< br >
< br >
2, in order to ensure battery life, when the battery power is higher than 85%, it will automatically switch to ordinary charging mode, and it is normal to stop flash charging at this time;
< br >
< br >
3, must use OPPO standard VOOC flash charge adapter and VOOC flash charge data cable at the same time, otherwise can not enter the flash charge;
< br >
< br >
4, when the flash charge data cable and the adapter or mobile phone contact is not good, it will not enter the flash charge. If you encounter the failure to enter the flash charge caused by the above conditions, it is recommended that you :1, unplug the adapter from the power socket for at least one minute to allow the adapter to discharge completely; 2, long press the phone power button at least 10s to restart the phone or unplug the battery and then plug in the battery to start; 3. Check that the data cable is in good contact with the phone and adapter; 4, re-charge to see if you can restart the flash charge, if the completion of the above operations still can not flash charge, please go to the customer service center for testing.
There are the following reasons:1. There is a problem with the socket board. Try replacing the socket board.2. There is a problem with the phone charger or charging cable.3. If the temperature of the phone is too high, it will also indicate that it cannot be charged.4. The machine charging interface is caused by poor contact.5. There's something wrong with the phone hardware.Most of the hardware problems of the mobile phone may be the problem of the data line.
According to the official parameters of this phone charging, the old period may be because the charger is not plugged in or the current is unstable.
This means that there is a problem with the charger of your phone, you should replace it with a new official charger, otherwise it is not good to charge the phone
Fast charge power failure may be poor contact, check whether the charging port is inserted tightly.
That's due to voltage instability