1, every day carefully check, maintain, maintain the use of production tools and equipment reasonable use of production tools to improve the production safety rate. Do a good job to keep the machine clean. Actively participate in the training organized by the company and the workshop and do a good job of coordination between positions. Complete all other tasks assigned by superior leaders of the company.
2, the professional skills in the personal resume should be truthfully filled in, such as the following: skilled operation of office software, good interpersonal communication, strong organizational skills. Have strongLeadership ability, business work ability, organization and coordination ability, communication ability, planning and execution ability.
3, your understanding of the position and work specific to what you do, how you work hard, which things you use the brain to solve.
4, the professional skills in the personal resume can write their own abilities and strengths, highlighting their own advantages and the fit between the work. The professional skills in the personal resume should be truthfully filled in, such as skilled operation of office software, good interpersonal communication, strong organizational skills.
5, to describe their outstanding strengths or advantagesGood at aspects, professional, can include a variety of related hard skills and soft skills, pay attention to be highlighted, and not fictional. Hard skills, also known as technical skills, are professional competencies that are easily measured and quantified. They are always learned, not born with.
1, the photo molding machine generally starts to have a preheating process, and can not set a high temperature at the beginning, insert the plug into the power supply, turn on the power switch, the power light (red)Light, the motor starts to work, turn on the heating switch, start heating, the temperature begins to rise.
2, then set the thermometer indicator to about 150°C, preheat to the "preheat" light, you can start the plastic seal. 03 When setting plastic seals, the temperature is too low, which may cause incomplete sealing. If the temperature is too high, it may fold due to overheating of the film, and even the sheet may be stuck in the machine.
3, the preheating time of the plastic machine varies depending on the ambient temperature. In general, when the temperature is higher in summer, the preheating time is shorter, and the set temperature can be lower at this timeWhat is the reason for the material
1, the material label of the reel is wrong, and the material name does not correspond to the real thing; (2) The quantity of material prepared on the reel is wrong, especially the quantity is insufficient; (3) FEEDER number corresponds to the material reel by manual transcription, it is likely to copy wrong data; (4) After FEEDER feeding, the placing order is wrong when pushed into the machine.
2. Cause The X and Y coordinates of "Patch data" are entered incorrectly. Countermeasure: Reset the "patch data" (confirm CAD coordinates or re-teach, etc.). Cause The position of the BOC label is offset or dirty. Especially dirt.The tendency of the patch to shift is very likely to be unfixed. Action: Confirm and reset the BOC flag.
3. The material plate is out of position. After the needle is stuck, the material plate will be mispositioned, resulting in the entire material plate hole position is wrong, and it needs to be sent to the physical store in time for maintenance.
4. Repeatability of X axis, Y axis and other transmission parts of the placement machine. Because the lower the accuracy of repetition, the greater the deviation when identifying. The greater the deviation, the more material will be thrown. Feida's feeding accuracy. The lower the feeding accuracy of Feida, the greater the deviation when the mounter picks up the components. The greater the deviation,The more you throw.
5, there are two kinds of components: reverse and anti-white, anti-white usually has the following situations: the material has static electricity, the element is reversed after absorption, the machine is not recognized; Most of the small components are caused by the nozzle sticking tin, because the machine can not be recognized, and it is good to maintain. Well, from what you're saying, it sounds like you're turning white.