Burning card is a portable game console such as GBA NDS with a writable cassette, through burning, so that a lot of games or various content can be stored in a burning chip, and then through the machine to read the content of the chip, use the content of the card.
A burning card is a storage device used in game consoles to store and load game data. It usually consists of a flash memory chip and an adapter that can be inserted into the card slot of the game console. The main function of burning cards is for playersC), can burn the CELL data inside these ics, resulting in different functions.
burner is used to burn the program file in a specific format (such as *.hex *.bin, etc.) into the internal EEPROM of the MCU, so that it can run the program you burn after being powered on.
1, do not burn is OK, now refresh the BIOS method is also a lot, the most convenient is "online refresh", generally with U disk into the BIOSRefresh.
2, the burning program, you need a burner, a computer, a burner driver, a single chip microcomputer chip or a circuit board with a single chip microcomputer chip. The connection is that one end of the burner is connected to a computer, connected to a USB, a serial port or parallel port, and the other end is connected to a single chip microcomputer chip or a circuit board with a single chip microcomputer chip.
3. Support. The bios programmer is a special instrument for reading, writing, programming and burning the bios chip. Therefore, the device has no specific requirements and regulations for the motherboard, so it is supported. The product is very good both in terms of quality and qualityYes.
4, because the eMMC chip burning program is large, from 1GB to 4GB files, it needs a fast burner to improve the burning capacity, such as the P800-Flash burner of Zhiyuan Electronics.
5, look at the different driver board, I know the universal driver board such as Lehua's 2025 all have to write programs. As for your master said I can not agree, 20 inch widescreen is 1600*900 22 inches is 1680*1080 resolution are different if can be universal? The biggest difference is the resolution.
Function is different, use frequency is different. The emulator is mainly used to simulate the single chip computer, which can run the program directly on the user board, and can also debug the program, such as single step, breakpoint, etc.
An emulator replicates the functions of one system from another. The difference from Computer Simulation systems is that the simulator is dedicated to imitating the external performance and behavior of the system, rather than simulating an abstract model of the system.
Debugging mode: The emulator supports a variety of debugging modes, while the burner does not support a variety of debugging modes.
Program download is only a small function of the emulator, the most useful place is that the program can be debugger. When your program is more complex, it is sometimes difficult to find the cause of a BUG just by examining the code.
Simulator is used to simulate simulation, that is, do not download the program to the single chip computer, but simulate the single chip computer in the simulator to run, easy to debug the program. The burning of the single chip microcomputer is a number of times, to a certain number of times, it can not be burned