If the electronic scale cannot be weighed properly after charging, there may be several reasons:
< br >
1. Low power: the scale may take longer to charge, or the battery that has been used for a long time needs to be replaced.
< br >
2. Poor contact: the poor contact of the electrode or battery of the electronic scale may lead to the failure of the photovoltaic charge to charge normally during charging, resulting in a non-bright problem during weighing.
< br >
3. Broken: long-term use or falling may cause damage to the internal parts of the electronic scale, resulting in failure to weigh.
< br >
4. Display problem: When the electronic scale is not allowed to weigh at the same time and the display is abnormal, there may be a problem with the display screen, and the display screen needs to be replaced.
< br >
< br >
1. Check the charger and power supply: ensure that the charger and power supply work normally, if the charger power supply is off and confirm the electrical connection.
< br >
2. Check the battery connection: Open the electronic scale, check whether the battery contact is good, confirm whether the metal contact corrosion and other conditions, if there is an abnormal battery should be replaced in time.
< br >
3. Check the weighing platform: check whether the screws on the weighing platform are locked and check the connection of the load sensor to ensure that the connection is firm.
< br >
4. Seek maintenance: If the above methods can not solve the problem, indicating that the electronic scale itself has a problem, at this time we recommend to seek professional maintenance workers for maintenance.
After charging the electronic scale, if the weighing time is not bright or the reading is not accurate, it may be caused by the following reasons:
< br >
1. If the power cable is loose or damaged, check the connection status of the power cable and determine whether it needs to be replaced.
2. The sensor under the scale may be damaged or dirty, and the pan needs to be removed for cleaning and inspection.
3. The sensor connection line inside the scale body is loose, and the pan needs to be removed for inspection and repair.
4. If the scale has been used for a long time, the display or internal sensor of the electronic scale may also have aging problems and need to be replaced or repaired.
< br >
You can first try to check whether the power cord and sensor are normal, if you can not solve the problem, it is recommended to send the electronic scale to the repair shop for detection and repair.
The display is not bright. First check whether it is out of power. You can try it after charging for an hour.
Secondly, it may be that the display or the internal chip link is loose, and it needs to be disassembled for testing and maintenance