The can line failure of Weichai engine may be caused by poor line connection, short circuit or damage. During maintenance, you need to check the connection of the can cable to ensure that the cable plug is not loose or in poor contact. If the connection is good, you can use a multi-purpose tester or oscilloscope to detect the CAN signal, find the fault point and repair it. If the can cable is damaged, replace it with a new can cable and reconnect it. After maintenance, can signal testing is also required to ensure that the fault has been solved.
The CAN line failure of Weichai engine may be caused by poor contact or damage to the CAN line. You first need to check whether the CAN wire connector is loose or corroded, and if so, you need to reconnect or replace the connector. If the connector is normal, the CAN cable needs to be tested using a professional diagnostic tool to determine if the CAN cable needs to be replaced. During maintenance, attention should be paid to maintaining a clean and correct connection to ensure the reliability and stability of the CAN line.
Weichai engine CAN line failure may be caused by poor line contact, line short circuit, line break, CAN chip failure and other reasons. Maintenance requires the use of special diagnostic equipment to detect the fault, and maintenance according to the specific situation. Common maintenance methods include checking line connections, replacing damaged lines, replacing faulty CAN chips, and so on. After the completion of maintenance, it is necessary to carry out functional testing to ensure the normal operation of the CAN line.