elimination method
1, reset the failure light, you can eliminate.
2. Press the SET button with the tire pressure mark on the right side of the front of the stop rod for a long time. If the tire pressure is normal, the alarm light can be eliminated.
3, long press the tire pressure monitoring key until the light is off, so that it can be eliminated, and then press the tire pressure monitoring key until the light is on, so that it can be set up again.
4, can be eliminated by setting inside the multi-functional steering wheel. Or use a computer detector to reset and eliminate.
multi-function steering wheel
5, open the glove box on the passenger side, there is a button in the upper left corner (next to the auxiliary airbag key switch), in the case of opening the ignition switch, press and hold the button until the tire pressure light is off. But the tire pressure must be within the normal range.
To remove the tire pressure sensor failure light, you first need to determine the specific cause of the failure. It can be adjusted by checking whether the air pressure of the tire is appropriate, using a tire pressure gauge to measure the air pressure value of each tire, and promptly supplementing or discharging the air pressure.
If the pressure of the tire is normal, the sensor itself may be faulty, and you need to go to a professional auto repair shop to repair or replace the sensor. Before repair or replacement, you can try to reset the tire pressure sensor system by following the steps in the vehicle's user manual. If the above methods are ineffective, it is recommended to contact a professional car maintenance personnel for troubleshooting.