Thermal conductive silicone or thermal adhesive can be well adhered to the heat sink on the chip.
The main function of thermal conductive silicone and thermal conductive rubber is to improve the heat transfer efficiency and heat dissipation effect.
They have good adhesion and thermal conductivity, and can effectively connect the heat sink and the chip to ensure the normal operation of the chip.
At the same time, thermal conductive silica gel and thermal conductive rubber have strong high temperature resistance and corrosion resistance, and can remain stable in long-term use.
When using thermal conductive silicone or thermal adhesive for bonding, the following points should be noted: 1. Clean the chip surface to ensure no oil and impurities; 2. Evenly apply thermal conductive silicone or thermal adhesive to the surface of the chip, and try to avoid too much or too little; 3. Gently press the heat sink and chip together, and ensure that there is no gap between the two; 4. Wait for the silicone or thermal adhesive to dry before starting the chip.
High temperature heat guide adhesive can be attached to the heat sink.
Because the high temperature thermal guide adhesive can meet the needs of the chip heat sink, has high temperature resistance, and can also improve the thermal conductivity, which is conducive to the heat dissipation of the chip.
The common high-temperature thermal adhesive is silicone thermal adhesive, silicone grease thermal adhesive and so on.
It is worth noting that the surface of the chip should be cleaned before using glue to ensure bonding effect. At the same time, it is necessary to be very careful when handling the chip to avoid affecting other parts of the chip, and it is best to ask professional maintenance personnel to deal with it.
The answer is as follows: You are advised to use thermal conductivity adhesive to repair the chip. It can effectively glue the heat sink and has thermal conductivity performance to ensure the heat dissipation effect of the chip. Select a suitable type of thermal conductivity adhesive and glue according to the instructions.
On this issue, the heat sink can use thermal conductive adhesive or thermal conductive silicone grease to stick on the chip, these materials have good thermal conductivity, can effectively transfer the heat of the chip to the heat sink, thereby improving the heat dissipation effect.
< br >
When using thermal conductive adhesive or thermal conductive silicone grease, it is necessary to pay attention to the use of appropriate amounts to avoid excessive heat dissipation or overheating problems. At the same time, a reliable thermal conductive adhesive or thermal conductive silicone grease should be selected to ensure the stability and durability of the heat dissipation effect.
With the scope of knowledge I understand, the current popular chip heat sink glue is mainly heat conduction glue, which can effectively fix the heat sink on the chip to ensure that the heat can be transferred smoothly. At the same time, this glue has less damage and impact on the chip itself.
Therefore, it is recommended that you buy a professional heat transfer adhesive for bonding.
As for the specific brand and model, it is recommended that you first confirm the heat sink and chip model you use, and then carry out relevant consultation and selection to ensure better bonding effect and safety.
At the same time, it is also necessary to pay attention to factors such as the position, pressure and temperature of the heat sink during use to ensure the heat dissipation effect and the stable operation of the chip.
502 glue will do. It is best to use AB adhesive for bonding. Because it's very strong when AB adhesive is attached. I have a lot of faith in AB adhesive properties. Because the general daily necessities are broken, I use this glue to bond.
After the heat sink aluminum sheet is removed, it can be coated with thermal silicone and then glued on, and it needs to be fixed and can continue to be used.
First, use the silicon grease used on the CPU heat sink to evenly coat the motherboard chip, and then glue the heat sink on, and finally find a way to fix the heat sink on the line. Generally, there is a buckle, and the card is fixed on the motherboard.