First, mobile phone infrared sensor failure:
1. Confirm whether the infrared sensor of the mobile phone is blocked by other objects (such as dirt, mobile phone film, etc.), and try again after cleaning;
2. Slide up the shortcut bar -- one-button acceleration (for some models, click the left menu key\/background key -- click \"×\") to end the background running program or restart the phone;
3, Enter the phone Settings -- System management\/more Settings -- Backup and reset\/restore factory Settings -- restore all Settings (this operation will not delete the data in the phone).
If the above methods can not restore the phone to normal, it is recommended to take the phone to vivo customer service center for testing and processing.
Infrared intelligent switch is an automatic control product based on infrared technology. When someone enters the sensing range, the special sensor detects changes in the infrared spectrum of the human body, automatically switches on the load, the person does not leave the sensing range, will continue to switch on; After the person leaves, the delay automatically closes the load. People to the light, people off the light, friendly and convenient, safety and energy saving, but also shows humanized care.
Infrared intelligent power saving switch is an automatic control product based on infrared technology. When someone enters the sensing range, the special sensor detects changes in the infrared spectrum of the human body, automatically switches on the load, and the person does not leave the sensing range, will continue to switch on; After the person leaves, the delay automatically closes the load. People to the light, people off the light, friendly and convenient, safety and energy saving, but also shows humanized care.
The infrared intelligent power saving switch does not need any sound when it is triggered, but the body emits infrared heat to the outside world when the person walks by and finally controls the opening of the lamp, and when the person leaves, after a certain time delay, the lamp is automatically extinguished. Because it is different from the sound-light control lamp, it does not need sound and switch control, so as to avoid the intrusion of voice control noise, and because it is the induction of human heat control switch, it avoids the loss of ineffective electric energy and achieves energy saving effect.
Third, the most widely used lighting in public places (such as public corridors and stairwells) is the sound-light controlled time-lapse lamps and switches that appeared a few years ago. The emergence of this lamp and switch, the realization of people to light up, people walk off the light, has become the mainstream product of public lighting switch. Of course, this product does achieve the purpose of energy saving to some extent, but at the same time, it also causes certain damage to people's living environment. Due to the limitations of the performance of the product itself, the realization of such acousto-optic controlled lamps and automatic switch control requires the coordination of sound (more than 60 decibels), which causes certain noise pollution to the quiet environment required by the public.
With the development of society and people's attention to the ecological environment, this kind of sound-light control lamps and switches have been slowly unable to meet people's needs, which requires the emergence of more energy-saving and environmentally friendly automatic lighting control products to meet people's needs for high-quality life.
Infrared intelligent power-saving switch is a kind of high-tech product with broad market prospect formed by adding more high-tech elements and mature infrared induction technology as a platform. Its appearance makes up for the defects of sound-light control technology. Its automatic control realization does not require the cooperation of sound and other conditions that will affect the environment. It is the infrared heat that the body emits to the outside world when the person walks by and finally realizes its automatic control function.
At the same time, because it integrates more advanced high-tech elements, more energy saving, more environmentally friendly.
4. Main technical indicators
1, applicable voltage: ac180v-250v(50\/60hz)
2, load characteristics: fully compatible load power: 25w-200w
3, induction range: 120o conical Angle within 5-6m
4, lighting control: > 250lux automatic extinguishing < 120lux automatic opening (someone in the room)
5, closing delay: 9 min 30s
6, connection: three-wire series connection type
7. Power consumption: less than 10mw
8, working temperature: -20℃ -50 ℃
Fifth, infrared intelligent power-saving switch using the human body infrared induction principle, the use of advanced integrated circuits and precision electronic components of multiple combinations, it has the following significant characteristics:
< br >
1, the use of advanced mature integrated circuit high energy saving, annual power consumption is only 2 ~ 3 degrees.
< br >
2, the use of human infrared sensing principle, supplemented by high-precision sensors, no sound and switch control, people to light up, people walk off the light, the day is not bright, night light (due to the strong light during the day, the sensor automatically closed), thus effectively ensuring the quiet living space in the building.
< br >
3, the multiple combination of precision electronic components, to avoid the strong current generated by the lamp in the triggered moment (sound-light control lamp will generate strong current in the triggered moment), which greatly extends the service life of ordinary bulbs (more than 5 times), product life of more than 8 years, to avoid the long-term replacement of bulbs, but also to achieve the purpose of energy saving.
< br >
Six, infrared intelligent power saving switch according to the needs of various installation environment, two kinds of installation methods that can meet a variety of environmental conditions are designed:
< br >
1. The induction Angle of the embedded infrared intelligent induction lamp on the wall can reach 120 degrees, which overcomes the dead Angle problem of the corridor. Even if you walk on the corner of the corridor, the induction lamp can work normally.
< br >
2, ceiling type infrared intelligent induction lamp with its high sensitivity, wide Angle and other characteristics, is widely used in corridors, corridors, toilets, balconies and other places, its beautiful appearance, can be used with a number of luxury lamps, both to solve the voice control lights and manual switching lights noise impact and inconvenience, but also can achieve excellent decorative effect.
< br >
Infrared intelligent power saving switch is a high-tech product, its performance is stable, really achieve both energy saving and environmental protection, can be said to be the perfect alternative to sound and light control products.
< br >
It is through the human body radiation, can automatically and quickly open a variety of lamps, anti-theft alarms, automatic doors and other electrical equipment. Especially suitable for medium and senior hotels, apartments, enterprises and institutions, shopping malls, corridors, corridors and so on. The mode can be one trigger or continuous trigger.
1, power failure, no power supply can not run solution: re-power.
< br >
2, automatic induction door sensor failure solution: remove the induction wiring, press the \"test key\" door can operate normally, while excluding other parts of the problem, update the electronic controller.
< br >
3, the electric controller failure solution: remove the induction wiring, repeatedly press the \"test key\" door can not operate normally, check the line connected to the motor. At the same time, after eliminating other questionable components, update the electronic controller.
< br >
4, safety light failure solution: remove the safety light wiring, the door can operate normally, update the safety light or electronic controller, while excluding other parts of the problem.
< br >
5, motor failure solution: remove the induction wiring, repeatedly press the \"test key\" door can not operate normally, check the line connected to the motor. After updating the motor, while eliminating other parts with questionable problems.
< br >
6, due to the external access control equipment, send the wrong signal solution: release the access control cable, press the \"test key\" several times, when the door is running normally, to repair or update the connected access control equipment.
< br >
7, the door body stuck solution: check the deformation of the door body structure, check the damage to the bearing parts, re-reinforce or update the parts
1. Confirm whether the infrared sensor of the mobile phone is blocked by other objects (such as dirt, mobile phone film, etc.), and try again after cleaning;
< br >
2. Slide up the shortcut bar -- one-button acceleration (for some models, click the left menu key\/background key -- click \"×\") to end the background running program or restart the phone;
< br >
3, Enter the phone Settings -- System management\/more Settings -- Backup and reset\/restore factory Settings -- restore all Settings (this operation will not delete the data in the phone).
< br >
If the above methods can not restore the phone to normal, it is recommended to take the phone to vivo customer service center for testing and processing.