PLM13ZM is a Xiaomi mobile power supply, the following are the instructions:
1. Switch the machine: press and hold the power button for 3 seconds to turn it on, and press and hold again for 3 seconds to turn it off.
2. Charging: Connect the PLM13ZM to the charging cable through the Micro USB port, and plug it into the power adapter for charging.
3. Output: Connect the device that needs to be charged to PLM13ZM via USB port, and observe whether it has started charging on the device. If the device does not start charging immediately after plugging in, press the power button on the PLM13ZM to enable the output function.
4. LED indicator: PLM13ZM has 4 LED indicator to show the remaining power. Each indicator represents 25% of the energy.
5. Safety protection: PLM13ZM built-in a variety of safety protection functions, such as overvoltage protection, overcurrent protection and short circuit protection.
6. Precautions:
- To avoid excessive temperature, moisture or severe impact;
- To avoid natural discharge too fast without use for a long time, it should be charged and discharged every 3-6 months;
- Non-professional personnel do not disassemble or modify;
- If any abnormal phenomenon or problem occurs, please stop using immediately.
The plm13zm is a professional device that requires the correct steps to be followed.
First of all, you need to read the instruction manual carefully, understand the basic functions and operation process of the equipment, and then install the equipment correctly according to the instructions.
During use, pay attention to the safe operation procedures of the equipment, and perform experiments according to the operation instructions.
In addition, in order to maintain the normal use of the equipment, regular maintenance and maintenance are needed to prevent failures.
In general, the use of plm13zm equipment requires careful reading of the manual, operation in accordance with the procedures, maintenance, to ensure the normal operation of the equipment.
1, the main role of the power key of the millet mobile power supply is to view the current remaining power. One light represents 2500mA\/h, the machine will automatically discharge when connected to the external setting, after removing the connection cable, the machine will automatically shut down in about 2 minutes. You don't need to use it to turn the power off or on. The power supply is LG\/ Samsung top lithium ion battery, the latest USB intelligent control chip and charge and discharge chip of Texas Instruments (BQ24195).
< br >
< br >
2, millet mobile power charging indicator light will flash, full will change 4 lights are bright, if you do not charge when the power switch according to the number of lights to determine how much power. One light is 25 percent, and so on.