When the touch screen switch fails, you can try the following repair methods:
< br >
1. Clean the touch screen: Sometimes dust or dirt on the touch screen can cause the touch screen to malfunction. Gently wipe the surface of the touch screen with a soft, clean cloth to ensure that there are no impurities.
< br >
2. Restart the device: Sometimes the software of the device may have errors, causing the touch screen to malfunction. Try rebooting the device, turning it off, waiting a few seconds before turning it back on.
< br >
3. Remove the protective screen film or shell: The protective screen film or shell may cause the sensitivity of the touch screen to decrease or the touch screen to malfunction. If you use screen protectors or cases, try removing them before testing the touch screen to see if it works properly.
< br >
4. Calibrate Touch screen: Some devices offer touch screen calibration, which can be calibrated through the touch option in the Settings menu. Try to find the touch calibration function of the device and follow the instructions to calibrate.
< br >
5. Update device firmware and drivers: Sometimes the device's firmware or drivers may have bugs or problems, causing the touch screen to malfunction. Try to check if the device has updated firmware or drivers available, if so, download and install the latest version.
< br >
6. Hardware fault diagnosis: If the above methods do not solve the problem, then the touch screen hardware may be faulty. In this case, it is recommended to send the equipment for repair or consult a professional technician for repair.
< br >
Important: Before making any repair attempts, make sure your device has backed up important data.
There are many possible reasons for touch screen switch failure, and the following are some repair methods that need to be selected according to the specific situation:
1. Restart the device: Some touch screen switch failure problem may be caused by the unstable operation of the device, restart the device can try to alleviate this problem.
2. Clean the screen: Dust, dirt or grease on the surface of the touch screen may cause the touch screen to malfunction, so clean the screen, you can use distilled water or a soft cloth with cleaning liquid to clean.
3. Update the system: If there is a system defect that causes the touch screen to malfunction, upgrading to the latest system version or updating the software patch may help resolve the problem.
4. Calibrate the touch screen: In some cases, the touch screen may need to be recalibrated, you can find the touch calibration option in the device Settings.
5. Check the hardware failure: The root cause of the touch screen failure may also be a hardware failure, such as the touch chip, circuit board or touch screen problems. In this case, the equipment needs to be disassembled and professionally repaired.
If the above methods can not solve the problem of touch screen failure, it is recommended to contact the relevant manufacturer after-sales service center or professional maintenance personnel for deeper inspection and maintenance.
1, it may be caused by poor contact, need to cut off the power supply, and then wipe the contact clean to repair.
2, the circuit board burned out, the need to replace the circuit board, generally need to contact after-sales service professionals to operate.
3, it may also be the smart switch stuck, you can disconnect the power, take off the switch panel, see if there is foreign matter stuck, such as dust, small bugs, etc.
4, poor filtering, ripple interference, causing touch operation failure or failure, replace a good capacitor.