How usb to Ethernet works
The USB to Ethernet adapter is mainly used as a conversion signal for some devices without a network port. With the miniaturization and simplification of the device, some devices are only equipped with a standard USB interface, while others such as network ports, serial ports, parallel ports or VGA interfaces are not equipped, if you need to use such interfaces you can buy a USB converter to network ports, serial ports and so on. USB to Ethernet adapter specific installation method, insert this adapter into the USB interface of the device, and then install the driver, after the installation will be found from the device, this time for the converter set ip address, mask, dns, etc., can make the device normal Internet access.
Use USB female head to turn Ethernet RJ45 port, to use usb male head to turn Ethernet crystal head is generally not much conversion, is to use usb port to rj 45 port, in this case, his conversion line is very short, and even do not need to convert the cable, directly insert the usb port to RJ45 port on the line, so we do not need to find usb male head Ethernet crystal head, And just need to turn the usb port into a family of four on it