中文English
静电防护芯片ichaiyang 2024-05-10 1:53 48
Static electricity is easy to damage the integrated circuit, so before installation, it is best to touch the grounding conductor with your hand or wash your hands to release the st...

How to release static electricity before touching computer accessories?

Static electricity is easy to damage the integrated circuit, so before installation, it is best to touch the grounding conductor with your hand or wash your hands to release the static electricity that may be carried on your body. If possible, you can wear an electrostatic ring (also known as an anti-static wrist strap).

1. Take all parts out of the packaging box. Do not take them out of the anti-static shielding bag. Check whether the operating instructions and drivers of each part are complete, and carefully read the hardware installation instructions.

2. Before installing the mainboard into the chassis, install the CPU and memory. When installing an AGP or PCI card, wear ESD gloves before operating the mainboard. To determine whether the installation is in place, because when installing screws, some cards will be stilted, resulting in poor contact or even damage.

3. After installing basic hardware, you are advised to install only necessary hardware, such as the CPU, mainboard, memory, heat dissipation system, power supply, and graphics card. Connect other hardware only after the test works properly.

4. Do some cleaning, remember to use an anti-static brush to clean the main board.

5, the last step: power check, if the computer normal boot self-test, the display is displayed normally, then the assembly of the computer is successful, if not successful, please carefully check the problem, can be solved.