The answer is as follows: The key matching method of the PLC anti-theft device is different from that of the conventional door lock. In general, the key matching of the PLC anti-theft device requires the following steps:
1. Open the PLC anti-theft device: Open the door of the PLC anti-theft device with a matched key.
2. Enter programming mode: Inside the open PLC immobilizer, find the programming switch or button and press it to enter programming mode.
3. Enter the new key code: In the programming mode, use the new key to enter the code into the PLC anti-theft device.
4. Save the key code: After input, press the save key or confirm key to save the new key code to the PLC anti-theft device.
5. Exit programming mode: After saving, press the Exit programming mode key or key to exit the programming mode.
6. Test the new key: Use the new key to open the PLC alarm door and check whether it is successfully matched.
It should be noted that different brands and models of PLC anti-theft device key matching method may be slightly different, the specific operation, please refer to the corresponding instruction manual.
PLC remote control matching method
< br \/ >
Close the door, always step ON the foot brake, the door opens, the lights flash, the car key switches from OFF-ON for 3 times, and keeps it in the ON position, and the lights are long on. Long click any button of the remote control to learn on demand. After 3 seconds, the speaker will sound the result