The first servers to look for anti-theft devices are generally under the steering wheel of the car and in the rain baffle under the A-pillar.
2, then the server is equipped with a learning training hole, also called RESET switch. Use a small screwdriver or wooden stick against the learning hole for 10 seconds, you can remove the entire remote control. 3. At this moment, it is time to match part of the remote control. Press and hold the lock key of the remote control that must be matched once.
4, when the anti-theft display light gradually began to flash, it shows that the iron General remote control has been successfully matched. Naturally, some car keys have anti-theft integrated ics that need to be moved through the retractable key.
There is a small hole on the side of the main engine of the Iron General anti-alarm device, and there is a button inside, which can be used to press something like a toothpick for more than 10 seconds to delete all the remote controls.
When matching learning, the same long press this button, anti-theft indicator light long, release the button, start to press the remote control lock key to match the open key once, anti-theft light will blink, the control function indicates that the match is on.
You can do the same with the second one.
First of all, it is necessary to determine the frequency of the alarm host and the remote control to learn. There is a learning hole on the side of the host. Hold down the alarm light with the needle to blink, indicating that the learning state is entered. Then press the key indicator light of the remote control corresponding to the flashing prompt to prove that the learning has succeeded. It can be matched automatically.