The steps for matching the key chip are as follows:
1. Confirm the model and frequency of the key chip. Iron General car key chips usually have different models and frequencies, and you need to know the specific model and frequency when pairing.
2. Insert the car key chip into the dedicated pairing device. Some car key chips need to be paired with special equipment. Insert the chip into the slot of the device.
3. Turn on the power of the vehicle. Insert the car key into the ignition hole and turn on the power to the vehicle.
4. Enter the programming mode of the vehicle. Enter the key programming mode of the vehicle according to the instructions of the vehicle instruction manual. This may vary from vehicle to vehicle.
5. Connect the pairing device to the vehicle. Connect the device to the vehicle according to the instructions of the paired device.
6. Start pairing the car key chips. According to the operation instructions of the pairing device, start the pairing operation of the car key chip.
7. Complete the pairing and test. After the pairing is completed, insert the car key into the ignition hole to test the function of the car key to ensure that the pairing is successful.
Please note that the specific matching steps may vary by car model and car key brand. Before pairing, it is recommended to read the vehicle and car keys instruction manual, or consult a professional technician for guidance.
There are two common ways to pair the Iron General car key chip:
1. Use special equipment to pair: Usually need to go to the car repair shop or car key store to pair. Professional technicians will use special equipment to read the chip information of the original key, and then write this information into the new chip, so as to complete the pairing.
2. Pairing using the diagnostic interface of the vehicle: Some models provide a diagnostic interface, which can be used to pair the key chip by connecting the diagnostic device and the OBD interface of the vehicle. It is necessary to understand the vehicle model and specific diagnostic tools, and then follow the corresponding operating steps to program and pair the key chip.
No matter which method is used, it is recommended to perform the operation under the guidance of a professional to ensure the correct operation and avoid possible risks. At the same time, pay attention to comply with relevant laws and regulations and requirements of vehicle manufacturers to avoid illegal operations.
The method of pairing the Iron General car key chip usually requires the following steps:
1. Prepare the tool: Adding the car key chip to the vehicle system usually requires the use of a dedicated key programming tool or a visit to the car service center for operation. 2. Consult the vehicle's owner's manual: The vehicle's owner's manual usually instructs you how to pair using the key programming tool, including the steps to enter programming mode, key operation, etc.
3. Enter programming mode: Use the key programming tool to enter the programming mode of the vehicle as instructed in the user manual.
4. Pairing chip: According to the guidance of the key programming tool, place the car key chip to be paired on the programming tool, and then press the corresponding button to complete the pairing process. 5. Complete pairing: After completing the pairing process, test whether the new key chip can normally operate the relevant functions of the vehicle, such as unlocking, starting, etc.
Please note that the specific pairing steps may vary depending on the vehicle type and key programming tool, so it is recommended to read the relevant user manual or consult a professional before operating.
Iron General key chip marks and lock marks must be matched one by one.