If your Konka LED39F3200CE image appears white after startup, it may be caused by the following reasons:
< br >
1. The display brightness is too high: you can try to reduce the brightness to make the image clearer.
< br >
2. Display color temperature Settings are not correct: you can adjust the color temperature Settings to better suit your personal preferences or environment.
< br >
3. There is a problem with the signal source of the monitor: you can try to replace a different signal source, such as connecting to a different device (e.g. TV box, DVD player, etc.) to confirm whether it is the signal source problem.
< br >
4. Display hardware failure: If the above methods can not solve the problem, then it is likely to be caused by the display hardware failure. It is recommended that you contact Konka after-sales service center for professional technical support.
1. The startup image may appear white. 2. It may be because the brightness, contrast or color Settings of the display are not correct, or the signal line may be loose or poor contact.
3. If it is caused by incorrect brightness, contrast or color Settings, you can try to adjust these parameters to solve the problem.
If the signal cable is faulty, check whether the cable is loose or replace the signal cable.
If the problem persists, it is recommended to contact after-sales service or a professional for repair.
Konka boot image white may be a problem with the TV chip
If it has been guaranteed, replace AS15-G, a small chip on the logic board, and measure the screen voltage. LCD TV relative maintenance and maintenance moderate to prevent too much will accumulate on it, thunderstorm weather pay attention to lightning and moisture, indoor humidity is not too high, can not use cloth to cover the machine, at least in the boot state can not, because the LCD screen will produce more heat when working. Do not touch the LCD screen with corrosive liquids.
1. Test whether the TV has sound, if there is sound, the TV signal is no problem, if there is no sound, the TV signal may not come in, you can check whether it is improperly adjusted or the TV is faulty;
< br >
2. Test that there is no blue screen or snow on the TV. If there is snow, the TV hardware is not broken;
< br >
3. If there is no snow, black screen and no sound, it is necessary to see that the power indicator is not bright, if it is bright, it is the problem of the TV, if it is not bright, it is to see if there is no problem with the external power supply, and the power problem is the TV problem.
The reason for the white image may be that there is a problem with the screen, the TV is used for a long time, the loss is relatively large, you can call the after-sales phone door-to-door detection if it is not possible to change the screen