Logical expression: ABY110101011001 Logical symbol :NANDgate is a basic logic circuit of digital circuits. If the input is high (1), the output is low (0); If at least one of the inputs is low (0), the output is high (1). And not gates can be seen as superimposed with and not gates. And not gate is a combination of and gate and not gate, first performing and operation, then performing non-operation. The and input requires two, and if the input is represented by 0 and 1, then the result of the and operation is the product of these two numbers.
If 1 and 1(with signals at both ends), the output is 0; 1 and 0, the output is 1; 0 and 0, the output is 1. The result of an and not gate is the result of an and operation on two input signals, and then a non-operation on the result of the and operation. To put it simply, with non and non, is first and then non. A basic logic circuit in electrotechnics that is superimposed on a gate and a non-gate, having two inputs and one output. The logic gates in CMOS circuits are not gates, and gates, and not gates, or not gates, or gates, XOR gates, XOR gates, Schmidt trigger gates, buffers, drivers, etc.
And not gate is when 1 or more of the input terminal is low level, the output is high level; The output is low only if all inputs are high. And non-gate chip :74ls series :74ls00, 74LS20, CMOS series :CD4011.
wps writes and not gate images in the following way,
There are two methods for reference: Insert text box 1. Open the document, insert the picture, click \"Insert\" - \"text box\
2. Enter text in the text box and set the text box as required. For example, click \"Drawing Tool\
1. Open the document, insert the picture, click \"Picture tool\" - \"Surround\
2. Enter text and drag the image position.
To draw an image with a NAND gate, you can use WPS or other drawing software to complete the following steps:
1. Open WPS or the selected software to create a new drawing file.
2. Select the drawing tool or shape library and find the basic logic gate shape, usually located under the \"Electrical\" or \"Logic gate\" category.
3. Select the NAND gate shape from the shape library and insert it into the drawing page.
4. Expand and resize the shape to fit the drawing area.
5. Using the Connect Tool or Line Tool, draw input and output lines on the drawing page, connecting them to the appropriate location with the not gate.
6. Add input and output labels with and without gates to mark each connection port.
7. After the image design is completed, save the drawing file and export it to the required image format (such as PNG, JPEG, etc.).
Steps and details may vary depending on the individual drawing software, but the above guide provides a basic framework for drawing images with non-gates.