The support installation steps of Xiaomi Balance Car No. 9 Plus are as follows:
1. Prepare the support: After purchasing the support, unpack and take out the support and accessories.
2. Install the support base: Insert the support base under the handlebars, then secure the base to the handlebars using the screws provided in the accessory.
3. Install the support body: Insert the support body into the base, and then use the screws provided in the accessories to fix the body on the base. It should be noted that when fixing the screws, do not be too tight, so as not to damage the handlebars.
4. Adjust the Angle of the bracket: Adjust the Angle and height of the bracket according to personal habits and needs, so that it is more convenient to use mobile phones or other devices.
5. Install the mobile phone stand: If you need to use the mobile phone stand, insert the mobile phone stand into the main body of the stand, and then adjust the width and depth of the bracket clip according to the size and shape of the mobile phone.
6. Test use: After the installation is completed, put the mobile phone or other equipment into the bracket for test use to ensure that the bracket is firm and stable, and will not affect the normal use of the balance car.
It should be noted that safety needs to be paid attention to when installing the bracket to avoid damage to the handlebars and bracket. In addition, when using the balance car, it is also necessary to comply with the relevant traffic rules and safety regulations to ensure the safety of themselves and others.
The installation method is simple, and you only need to follow the following steps: 1. Place the support in the position corresponding to the body, and pay attention to the direction of the support. 2. Fix the bracket on the car body with a screw, pay attention to the appropriate adjustment of the tightness of the screw, not too tight or too loose.
3. Place the mobile phone or other device in the stand and adjust the Angle and position.
It can be said that it is very convenient and simple, and only takes a few steps to complete.
At the same time, the installation of the bracket can help users more conveniently watch the content of the mobile phone and improve the user experience.
The installation steps are as follows:
Install the bracket directly above the control pedal of the balancing car.
Make sure all four screws at the bottom of the support are tight.
Fix the balance car bracket to the balance car and make sure that the bracket position is correct.
If you need to move the balancing car forward, hold the armrest position provided by the balancing car bracket with your hand to provide an armrest position.
Please note that the specific installation steps may vary by manufacturer and model, please refer to the user manual of the Xiaomi Balance Car for details.