1. The right way:
The correct method of adding ice to the air conditioner is to open the ice bottle cap first when the air conditioning system is shut down, gently clamp the ice connection tube terminal with the air conditioning pipe pliers, and then connect the ice connection tube terminal on the ice bottle to the high pressure port on the air conditioning system, open the pressure gauge valve on the ice bottle, and slowly fill the ice agent into the system. Until the pressure gauge shows a suitable pressure value, then close the pressure gauge valve, remove the connecting tube terminal, and close the bottle cap tightly.
2. Explain why:
When adding ice agent, it is necessary to ensure that the air conditioning system is shut down, because the ice agent needs to be compressed into a high pressure gas by the compressor before entering the air conditioning system. If the air conditioning system is in the running state, the ice agent will enter the system because of high-speed gas friction and friction heating, resulting in insufficient gasification of the ice agent, affecting its cooling effect.
3. Content extension:
The use of ice additives needs to ensure indoor air circulation and open indoor and outdoor doors and Windows to make full use of fresh air for indoor air exchange, keep indoor humidity appropriate, and reduce human fatigue.
4. Specific steps:
(1) After the air conditioning system is shut down, open the ice bottle cap and prepare to connect the tube terminal to the high voltage port.
(2) Gently clamp the connecting pipe terminal with the air conditioning pipe pliers to prevent the icing agent from splashing out, and then connect the connecting pipe terminal to the high voltage port on the system.
(3) Open the pressure gauge valve on the ice filler bottle, slowly fill the ice filler into the system until the pressure gauge shows a suitable pressure value, and then close the pressure gauge valve.
(4) Remove the connecting tube terminal, close the bottle cap tightly, and complete the operation of adding ice agent.
(5) After adding ice agent, it is necessary to start the air conditioning system to make the ice agent flow evenly, and open the indoor and outdoor doors and Windows to maintain air circulation, so that the indoor temperature and humidity are more comfortable.
Hello, the following is the correct way to add snow to Gree 5 air conditioning:
1. Power off the air conditioner and remove the covers of the indoor unit and outdoor unit.
2. Use a professional air conditioner cleaner to clean the inside of the indoor unit and outdoor unit.
3. Put the snow seed can into the inflation tube and connect it to the snow seed valve on the outdoor unit.
4. Open the snow seed valve and slowly inject the snow seed into the outdoor unit until the pressure gauge shows the appropriate pressure (generally 0.8-1.0 mpa).
5. Close the snow seed valve, remove the inflation tube, and install the cover of the outdoor unit.
6. Power on the air conditioner, adjust the temperature and wind speed of the indoor unit, and check whether the air conditioner runs normally.
considerations
1. Before adding snow, the inside of the air conditioner must be cleaned to ensure that the inside is clean, otherwise the cooling effect of the air conditioner will be affected.
2. When adding snow, it must be filled in accordance with the amount of snow specified by the manufacturer, too much or too little will affect the cooling effect of the air conditioner.
3. When adding snow, slowly inject it to avoid excessive pressure and damage to the air conditioning system.