This situation is usually the cause of electricity, that is, it may be the cigarette lighter or the car charger is not in good contact, of course, it does not rule out the poor contact of the internal circuit of the driving recorder, according to the exclusion.
(Solution 1: there is a RESET hole on the recorder, find a needle to press the reset key inside for a while may be good) It should be noted that it is normal for the car to shut down and restart at the moment of ignition start, because your driving recorder is not connected to the normal power supply.
1, when the vehicle is turned off for about 10 seconds, the recorder will automatically turn off, this situation is not said, it is the effect we need, if you need to do parking monitoring, then turn off the automatic shutdown function.
2, the driving recorder memory card failure, due to the use of a long time, the memory card is prone to problems after repeated friction, if this happens, it is generally necessary to format the memory card on the computer, if it is a newly configured memory card, it may be incompatible with the card.
3, the problem of loose power supply, especially the use of a drag N cigarette lighter, will often appear loose, loose power supply, the recorder will automatically use the battery with the recorder, and the general recorder with the battery is not long, so there will be clearly turned on, and so on when there is a shutdown situation.
< br >
1. The driving recorder is used for a long time, and the memory card is prone to problems. The memory card can be formatted, or the storage card is incompatible, and it can be re-adapted.
2. The car recorder is connected to the car power supply, such as cigarette lighter, battery or safety box, etc., there will be loose situation, after the power is loose, the battery will automatically shut down after use.
3. Check whether the driving recorder is faulty, bump and damage caused by internal parts problems, frequent switching.
4. It may be that the wiring position of the car recorder is short circuitry, loose, or the switch button is pressed and does not bounce up, resulting in repeated switching of the machine.