To turn on fast charge mode on your ROG 2 phone, follow these steps:
1. Open the Settings menu of your phone. You can access the Settings menu by pulling down the notification bar and tapping the gear icon or by finding the Settings app in the app list.
2. In the Settings menu, scroll down and find the \"Battery\" option, then click to enter.
3. In the battery Settings, you will see an option called \"Fast Charge\" or \"Fast Charge\". Click to access the option.
4. In the fast charge Settings, you can choose to turn on or off the fast charge mode. If you want to turn on fast charge mode, please switch the switch to the on position.
Please note that ROG 2 phones support a variety of fast Charge technologies, such as Qualcomm Quick Charge and USB Power Delivery. The specific fast charge mode and setup options may vary depending on the phone's software version and region. If you can't find the fast charge option in the Settings menu, make sure your phone is updated to the latest software version and check if there are other options called \"Charge\" or \"power\" etc.
ROG 2 is a high performance gaming phone, it supports fast charge mode, here is how to turn on fast charge mode:
< br >
1. Connect the fast charger
< br >
First, connect your ROG 2 gaming phone to the fast charger and connect them via a USB-C cable.
< br >
2. Go to Settings
< br >
Locate your phone's Settings icon and tap it to open the Settings menu.
< br >
3. Go to Battery
< br >
Look for the option called \"Battery\" in the Settings menu and click on it.
< br >
4. Enter \"Fast Charge\"
< br >
In the battery Settings screen, you should see an option called \"Fast Charge.\" Click on it.
< br >
5. Turn on \"Fast Charge\"
< br >
In the \"Fast Charge\" option, you will see a switch. Toggle the switch from \"Off\" to \"On\".
< br >
You have now successfully turned on the fast charge mode of ROG 2. Please note that if your ROG 2 phone is not connected to a fast charger, you will not be able to turn on fast charge mode. In addition, in the fast charge mode, the charging speed will be faster, but it may also have a certain loss of the battery, so please pay attention to reasonable use.
Use the original charger and charging cable to activate the fast charge
Find the Settings option in your phone's home screen.
2, after finding the battery option, click on the super power saving switch.
3. You also need to click the switch to close some programs that consume a lot of power
If you want the battery to be fully charged, then you should set the power management mode to \"Maximum battery life\".
The method is as follows.
Here we go. Control panel, find the \"power\" option, double-click to open, and then click the Settings button in the middle of the lower right corner to see two power management modes, set the battery mode to the maximum battery life.
The longest battery life mode is to protect the battery and extend the battery life. Because the service life of the battery is related to the charging cycle, when using this mode, the battery charge will be automatically cut off when the charging power reaches a certain value to protect the battery, so the charging dissatisfaction phenomenon mentioned above will occur.