If it is in the case of electricity into the water, this situation generally does not need to disassemble the machine.
< br >
1. Power off as soon as possible.
< br >
2, hard shake dry, but do not get rid of the machine, the idea is to throw out the water in the screen. If there are any droplets left on the screen, there will be traces when it dries.
< br >
3, put the lamp, spotlights and other light heat sources to let the water slowly disperse. The process takes more than six hours. Do not rush to use a strong heat source such as a hairdryer (cold air can be used).
< br >
Second, if it is in the case of power failure into the non-corrosive liquid. In this case, you can basically assume that the machine is not damaged. But maybe the LCD screen will be ugly.
< br >
1. Shake it dry, but don't shake the machine off.
< br >
2, if there is no trace on the LCD screen, according to the first point of the third processing.
< br >
3, if there is something left on the screen and it is very serious, do not press the first point 3 treatment, because the electronic circuit after this treatment can work normally, but the screen may be ugly. It can be sent to the nearest maintenance department for processing or disassemble the machine by yourself.
< br >
(3) If it falls into non-clean water when energized, or into corrosive liquid or viscous liquid or other partially clean liquid regardless of whether energized. This is the most troublesome situation. But there is also a good chance that the machine will recover after proper treatment.
< br >
1. Power off as soon as possible
< br >
2, if it is falling into corrosive liquid (such as seawater), immediately rinse the machine with clean water. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.
< br >
3. Disassemble the machine as soon as possible. But take it slow when you're taking it apart.
< br >
4, clean with alcohol or professional washing machine water.
< br >
5. Assembly. Or take your disassembled stuff to a repair shop. Let the repair shop clean and assemble it for you again
1, use a paper towel to dry the water stains on the surface of the phone, and gently shake the phone.
2. After opening the hair dryer, blow on the mobile phone for a while, you can alternately blow the mobile phone with hot air and cold air.
3, use a screwdriver to open the phone cover, and then gently wipe the water in the phone with a paper towel.
4, if there is no reaction may be a part of the phone is broken, it is recommended to the mobile phone repair point for repair.