The connection method of HDMI HD interface with chip is relatively simple. First, make sure you have HDMI interfaces between devices, such as TVS, projectors, and computers.
Then, by finding the HDMI cable with the chip, plug one end into the HDMI output port of the device and the other end into the HDMI input port. Make sure the connection is strong and stable.
Next, turn on the appropriate device, use the remote control or operation panel to go to the menu, find the input source option, and select HDMI input.
At this point, the signal will be transmitted from the output device to the input device through the HDMI cable, to achieve high-definition picture and audio transmission.
Remember to turn off the device before disconnecting it at the end of use to avoid damage.
To connect an HDMI HD device with a chip, first make sure you have an HDMI cable with a chip. Plug one end into the HDMI output port of the source device, such as a TV, computer, or game console, and then plug the other end into the HDMI input port of the target device, such as a monitor or projector.
Make sure both ends are plugged in tightly and that both source and target devices are turned on.
Once the connection is complete, you should be able to see the HD content of the source device on the target device. If there is no signal after connection, check that the cable is tightly plugged in, or try to replace another HDMI cable.
The chip of the hdmi belt is a long-line amplifier, and the connection method is the same as the ordinary hdmi cable, but pay attention to the direction of the connection, do not connect the reverse.