one
With tools ready and lying down, locate the mounting hole for the support. The two holes are blocked by two rubber objects on the original car, and T-bolts are installed.
two
Because the inner side is lower, it is necessary to put a pad to install the rear bracket. When installing the rear bracket, remove the bolts from the original car. Here, the 13 wrench is used to mount a longer bolt clamping the main bracket.
three
Rear pedal installed. To install the front bumper, you must have the tools mentioned earlier ready, plus the front bumper behind the drill.
four
Remove the card from the plastic holder of the license plate Remove the two clips from the original car and lie down. You can see a row of buckles near the front.
1. Follow the following steps to install the rear bars. 2. First, the rear bar should be placed on the car body, then fixed according to the fixed point of the car body, and finally adjusted to maintain a certain distance and Angle with the car body. 3. If you are not familiar with the installation of the rear bar of the car, it is recommended that you seek the help of a professional to ensure the correctness and safety of the installation.
1. The rear bar of Magotan needs to be removed, and then a new rear bar is placed for fixed installation.
This assembly process requires a certain amount of time and experience as well as professional tools, so it is difficult for the average car owner to assemble the Magotan rear bar. 2. If you need to assemble the rear bar, it is recommended to find a professional auto repair shop or 4S shop for assembly, which can save time and ensure the assembly quality.
3. If you want to know more about how the Magotan is assembled and how to install it, you can go to Honda's official website to find the relevant information.