1. Preparations: Prepare the glass lifters and tools to be installed, such as wrenches, screwdrivers, and electric drills.
< br >
2. Remove the old parts: Remove the interior panel of the door with a screwdriver, remove the power supply and control circuit of the glass regulator, and then remove the original glass regulator.
< br >
3. Install the new parts: Insert the new glass lifter into the original bracket, and then install the relevant power and control lines.
< br >
4. Adjustment: After the new glass regulator is connected to the power supply, press the glass regulator control panel to test and check whether the glass regulator is installed successfully.
< br >
5. Install decorative plate: Install the interior plate of the door according to the original position, and ensure that all screws and fasteners are fixed.
1. The installation method of the first Volkswagen Lavida glass lifting bracket is more complicated.
2. Because the installation method requires removing the interior trim panel of the door, find the glass lifter, remove it, and secure it with a bracket.
This process needs to be familiar with the interior structure, otherwise it is easy to damage the door. 3. If you are not familiar with the structure of the car, it is recommended to hand it over to a professional car beauty shop for installation, which is safe and ensures quality, and can save yourself the cost of damage that may occur in the installation process.
．
Remove the door panel.
two
Remove the auxiliary wiring harness, connect the battery and door panel, and then connect to the corresponding wiring harness.
three
Connect the harness main connector to the main box of the glass regulator.
four
After the connection is complete, secure the main box of the glass lifter to the inside of the door panel with double-sided tape. Just secure it.