First, connect the bath bar to the power supply, and then long press the emergency\/distribution button for distribution network. The device addition of Mijia APP is basically the same, so there is no more explanation here. Follow the prompts step by step, but it should be noted that YEELIGHT smart bath only supports 2.4G wireless network.
< br >
2. Remote control setting and use
< br >
The pairing of the remote control is also more convenient, in the case of the bath power, press the wind direction and wind button on the remote control at the same time, you can start the code pairing, and the corresponding remote control device will appear in the APP after the pairing is completed. Of course, from the name \"remote control and switch\
< br >
In fact, the use of remote control need not be introduced, in addition to the wind direction button is invalid (for the PRO version of the function), the rest are literal, I believe that everyone can see at a glance, and the lighting button in addition to click the switch lighting, in the night light mode can also be long according to the light key to exit the night light mode.
Yeelight Bath Master remote control is a remote control device suitable for Yeelight brand bath master. By connecting the bath and remote control, users can easily control the switch, wind speed, temperature and other functions of the bath, to achieve intelligent use experience.
The remote control usually has a simple button design and easy-to-operate interface, which can easily adjust the various parameters of the bath, and can also set the timing switch function, which is more convenient and practical.
yeelight remote control pairing methods are as follows: 1. Connect the bath bar to the power supply, and then long press the emergency\/distribution button for distribution network.
2. Open the Mijia APP, click \"\" in the upper right corner to add the device, search for Bath Ba, and click Connect.
3. When the bath is powered on, press the wind direction and blow button on the remote control to start the code.
4. After pairing is completed, the corresponding remote control device will appear in the APP. Click the device to use it.