1. You can download and install yoosee, Android and Apple on your mobile phone. The software needs to be registered, and it can be used after registration.
< br >
2. After the camera is plugged in, wait for a while, the camera will send a voice prompt waiting for connection. At this time, open the mobile phone software and select Smart connection. Note: When connecting, ensure that the camera and the phone are on the same wireless network, otherwise the connection will not be possible.
< br >
3. Follow the software prompts, enter the WIFI password to connect, and enter the device password when the connection is successful. Note: The initial password of the device is 123.
< br >
4. At this time, click the interface, and you can perform remote monitoring and viewing on the mobile phone
< br >
The camera can be connected to the TV as follows:
< br >
1, in the POE monitoring system, since there is no need to lay additional power cables for the camera, the spoe switch is not only responsible for power supply, but also for network connection.
< br >
2, and then the installation of the bracket. In general, it's pretty much the same. Most of them are locked directly with screws and installed above the monitoring position according to the actual situation.
< br >
3. After the camera is installed, connect the line. spoe technology makes the connection simple. Only one network port.
< br >
4, if installed outdoors, it is strongly recommended to use waterproof kits.
< br >
5. Here, specify the LAN2 port of the SPOE switch and connect it to the LAN1 of the router with a network cable.
< br >
6. After the switch and router are connected, when the router can be connected to the external network, connect the LAN1 port of the spoe switch to the network port of the DVR with a network cable.
< br >
7. In this way, after starting up, the device will automatically scan the camera in the network and automatically connect online. As long as the appropriate application is manually installed, remote viewing can be done with simple Settings.
answer
1, first of all, make sure that the TV and mobile phone are in the same WiFi network;
< br >
2. Turn on the Miracast function in the TV, turn it on and record the name of the TV. If the TV does not have this function, you can download a screen projection application or cast the screen with the help of the TV box;
< br >
3. Turn on [Settings] - [Other wireless connections] - [Multi-screen interaction] on the phone, search for the name of the TV in the waiting list after turning on the switch, and select the name of the TV;
< br >
4, after the successful connection, you can project the phone screen to the TV, TV box and other devices.