This indicates that there is a fault in the charging bin. Try to take out the headset and put it in again to charge, or check whether the data cable and interface are not well connected. The charger and battery are faulty, which can be detected or replaced. This is because you have not put the Bluetooth headset in the charging bin, only in the charging bin, its light will go out.
< br >
This indicates that there is a fault in the charging bin. Try to take out the headset and put it in again to charge, or check whether the data cable and interface are not well connected. The charger and battery are faulty, which can be detected or replaced. This is because you do not put the Bluetooth headset into the charging bin, only in the charging bin, its light will be extinguished if it is not possible, you can only replace the internal chip
< br >
Bluetooth earphones put in the charging bay will definitely not connect to Bluetooth because Bluetooth earphones are charged in the charging bay. Will not connect to Bluetooth.
That's because the earphones aren't connected to the charging bay contact
1. First check the contact point between the headset and the charging compartment. After each earphone is put into the charging bin, the indicator light will be bright, and if it is not bright, the contact is poor, and the earphone does not start charging, this problem will occur.
< br >
2, if the charging bin has a protective cover, then check whether the protective cover affects the magnetic closure of the cover. Some of the size of the sleeve is too large will lift the lid, focus on checking the lid edge:
< br >
3, the lack of charging capacity will also make the headset unable to enter the charging state. In this case, you can connect USB to charge the charging bay.
< br >
4. It may also be caused by oil accumulation and oxidation where the earphone metal is in contact. If there are stains, use a cotton swab with alcohol to wipe the contact position clean.