103A original cartridge chip removal process is as follows:
< br >
1. Remove the toner cartridge chip from the printer and place it on a clean, flat work table.
< br >
2. Locate the screws on the toner cartridge chip and loosen them using a screwdriver.
< br >
3. Remove the lid of the toner cartridge chip and separate the lid from the old cartridge chip.
< br >
4. Clean the bottom and edges of the cartridge chip chamber with a vacuum cleaner or compressed air to ensure that any debris and dust are removed.
< br >
5. Remove the new toner cartridge chip and place it in the chamber. Make sure the new toner cartridge chip is installed correctly.
< br >
6. Close the cover and tighten the screws using a screwdriver.
< br >
7. Reinstall the toner cartridge chip in the printer.
< br >
The above is a simple step to remove the original 103A cartridge chip. It is recommended to have some understanding of the toner cartridge and surrounding accessories before operation to avoid unnecessary damage to the printer and other equipment.
It is not recommended to remove the original 103a cartridge chip, because removing it will cause the chip to fail or malfunction.
If you need to replace the toner cartridge, you can replace the toner cartridge by following the corresponding steps.
If you need more detailed operation process, you can query the video of toner cartridge replacement or consult professional technicians.
① Use pliers to cut off the three nails on the cover where the original toner cartridge chip is installed;
② Insert the pliers into the gap between the cover and the toner cartridge and pry outwards to remove the cover;
③ Push the chip out in the cover and remove it;
④ Insert the chip into the new toner cartridge, and the single notch side of the chip can be outwards.
If the chip can remove his chip, you first need tools to remove its screws, and then you can remove the chip