Simple base installation method:
< br >
1. Insert the support rod into the base.
< br >
2. Tighten the connection screws at the bottom of the base and fix the support rod firmly. Note: The screws used in different production batches will also be different.
< br >
3, put a soft cloth on the table to protect the product, put the product face down on the soft cloth.
< br >
4. Install the base support rod on the display.
< br >
Here's a reminder: Do not flip the product by just holding the base. Do not press down on the monitor as this may damage the monitor.
< br >
Samsung LCD TV double column seat base installation steps
< br >
1, first put the oval plastic gasket set on one end of the oval tube, (pay attention to the set in place, otherwise the TV will be high on one side and low on the other), and then fix it on the tempered glass with the corresponding screw, and put the book iron sheet with 3 holes under the glass.
< br >
2, with the frame of the base (the rectangular iron plate) with the corresponding screws, nuts tightened on the oval tube (be careful not to excessive force, otherwise the hollow oval tube will be deformed),
< br >
3, with 2 perforated steel plate choose the right hole distance horizontally installed on the back of the TV, and then hang the TV on the stand, after the locking screw (2 slender screws) screwed in the bottom of the 2 steel plates with many holes, (the hole in the slot, not the row of holes) to prevent the TV from moving around, be sure to pay attention to the 2 locking screws oh