You need to press and hold the clip on the base of the monitor and apply downward pressure
1, the bottom of the LCD display is mainly divided into two parts: base and rotating shaft; Disassemble first from the base, first put the liquid crystal display flat on the table, pay attention to the table must be flat, and the desktop without any debris, so as not to bump and damage the liquid crystal display screen, of course, if the bottom can put some sponge or other flat soft things better.
2, the base of the general display does not use fixing screws, you only need to press and hold the buckle of the display base, and then the base of the display can be removed.
3, the design of different display bases is also different, and not all display bases can be forced down. Some may have fixed screws, we must pay attention to observe their own display base structure before disassembly, understand the principle and then disassemble.
4, after the base is removed, the next thing to do is to remove the shaft, first remove the buckle cover on the shaft. Later, you can see that the inside of the shaft is usually fixed by a number of screws, here you need to remove the fixing screws, and then you can remove the shaft very easily.