Now it is convenient to shop online, and folding bicycles have become the first choice for white-collar workers to buy bicycles with their advantages of getting on the bus and subway and getting down the elevator and stairs. So received a lot of bicycle accessories, how to install it into a whole car?
< br \/ >
Tools\/Materials
Folding several bicycle accessories
Screwdriver (L-shaped size 1, plum blossom type)
multipurpose wrench
pump
Methods\/Steps
1. Place accessories. Both hands hold the bike frame and the front of the body part out of the package, do not pull, brake line and speed line is not as strong as you think; Gather all accessories and tools together.
< br \/ >
< br \/ >
2. Open the body. Pull up the pedals; Remove the cable tie on the beam of the frame, snap it up and remove it quickly, and pull up the support to make the frame stand on the ground.
< br \/ >
< br \/ >
3. Install the locomotive. Grab the front, insert the front tube, clamp the front wheels with your legs, align the front, rotate and twist the small handle on the fixed rod at the top of the front, lock the front, and press the small handle down; There is a large extra large screw cap at the connection between the front and the front tube, which is screwed to lock.
< br \/ >
4, cushion installation. In the cushion tube, the car lock and taillight are generally installed, and the cloth strip can be found when the washer is not enough; Straighten the cushion, use a wrench, twist the quick disassembly, make the lock, ensure that the cushion is firm and not loose.
< br \/ >
5. Rear fender. The rear fender is installed under the seat, with a washer, and fixed with a screwdriver; The fender contains two height-adjusting screws, and the Angle can be adjusted with a screwdriver.
< br \/ >
6. Kettle rack. There is a screw on the kettle rack. Tighten it with a screwdriver.
< br \/ >
7, mail-order complete sets of bicycle accessories, seemingly installed, in fact, for their own safety, each screw should be carefully checked again, especially the brake and variable speed and other places, in addition, the front and back of the car must remember to install, walk at night, they can remind the front and rear of the motor vehicle drivers on the road.
< br \/ >
< br \/ >
< br \/ >
8. The installation is complete. Inflate the tires with a pump, and a folding car is ready to roll.
1, first of all, you need to buy mountain bikes online, and you need to choose regular manufacturers. After receiving the goods, check whether the parts are complete and there is no damage. In case of few pieces, contact the merchant in time for replenishment.
< br \/ >
2, unpack, take out the car shelf on the ground, pay attention to the ground should be padded with paper, so that the body is not easy to damage. Then take the scissors, cut off the packaging bag and adhesive paper on the frame, and unload the vehicle.
< br \/ >
3, put the frame flat on the ground, take the handlebar, put the handle clip on the car, and then put the screws into the hole slot. Take out the tools that come with the car and tighten the handlebars.
< br \/ >
4, take the front wheel, and then put it into the frame fork, put the front wheel brake disc into the wheel brake steel ring, and then lock the screw. Put screws on both sides of the frame, tighten them, put the foot brace down, and check the chain. If the chain falls, to put the chain on, you can use a tool.
< br \/ >
5, take out the pedals on both sides of the car, and pay attention to the separation of the left and right sides. Then put into the pedal hole, rotate a few times by hand, and then lock with the tool. When installing, pay attention to the direction of screw rotation.
< br \/ >
6, put the foot brace down, and check the chain of the bike. If the chain falls, to put the chain on, you can use the tool, if there is to buy other parts of the mountain bike, it must be taken out. For example, install a flashlight or bell, you can see the specific installation position, and then use a tool to lock it.