1, the new machine is recommended not to rush to charge, the normal use of electricity to the screen prompts 10% need to charge. Then shut down, shut down and charge once. The first time the new machine is best to use electricity, it is recommended not to use up, the new lithium-ion polymer battery, different from the old battery, no memory effect.
2, first plug the data cable into the mini charging port, and then plug the two-hole plug into the socket. The time to use the remaining 10% for the first time and then fully charge it is about 4 hours. This is only the approximate time, the time will change depending on the ambient temperature of the charging! If the ambient temperature is below 10 degrees, it is recommended to put the mini in a warm environment for charging. The ambient temperature between 0 degrees and 35 degrees is the appropriate temperature for the use and storage of mini batteries, and 22 degrees is the best temperature. Note that mini batteries are not easily charged at low temperatures. The appropriate temperature of the environment when charging is 10-35 degrees. Lower than 10 degrees charge slower! Ambient temperatures of more than 35 degrees can seriously reduce the effective capacity of the battery, causing irreparable damage.
3, shutdown charging how to determine whether it is full? Press the home button and a large battery icon will appear in the center of the screen. The battery is fully charged if it does not have a white lightning symbol under it. The status when charging is a large battery icon with a white lightning bolt symbol for charging.
Sometimes the shutdown charging is actually completely full, you press the home button to observe that it will be completely full, but the big green battery also has a lightning symbol! The battery circuit design has a protective function, in order to prevent overflushing, if the battery continues to plug in after full, it will automatically discharge a small part, and then continue to trickle charging. This is also marked with a lightning bolt. If you want to let the time statistics on the ipad after the last full charge display normally, you can also choose to turn on the charge. In order to equipment safety another point of advice, fully charged in time to disconnect the charger, charge more useless! After connecting the ipad mini to the USB2.0 port of the computer, the mini can also be slowly charged, if your PC can not provide enough power to charge the mini, the status bar will display \"not charging\" message.
4, fully charged, at this time do not pull out the data cable, do not unplug! Then press and hold the power button normally for a while, and the screen will quickly appear the charging status chart and flash, and then the white Apple logo logo will appear until the normal startup. After step 5, pull the plug out of the socket first, and then pull out the data cable connector on the mini. The procedure is exactly the opposite of that when charging. (There is also a way to judge the full full is to touch the white plug on the socket with your hand, and feel that it is heating, which means that it is charging, if the heat is weakened to warm, the temperature is naturally reduced when the trickle charge or the electricity is full automatically stop charging, and you feel that it is not hot when you just plug in to charge, it means that it has been fully full).
5, after entering the system lock screen interface, a box will pop up saying that the battery has been charged 100% after disappearing, swipe the screen to enter, at this time, the upper right corner will display 100% and the small battery icon will have a small plug to mark the fully full state (if the battery is charged after 100% display, the small battery icon has a lightning symbol at this time the battery is charging at a trickle, Need to wait for more than 10 minutes until the identifier is converted to a small plug identifier is fully full) Setting - General - usage will see the time statistics since the last full charge. Usage time and standby time start from 1 minute.
Of course, if you shut down and restart at this time, the time will continue to calculate, but not initialize! Unless you use it for a period of time and then continue to turn it off and charge it and turn it on again after step 4, then the time will start again.
6, use about a month for full charge and discharge once! The battery is automatically turned off, and then turned off and fully charged once. It is recommended not to charge while playing games when charging, which is not good for the battery. As for the Hong Kong Bank, most of them are automatically turned on when they reach enough power to turn on after plugging in and then charging. Of course, if you turn off the machine manually at this time, you can also rush. (The national bank will not automatically open the machine) On the problem of charging dissatisfaction: you can try the 6th full discharge and then shut down and full once, if still dissatisfied, replace a charger. Most are the charger or very few data cable problems.
7, the number of battery charging is calculated by the use cycle. A charge cycle means that all of the battery's power is used up (but it is not the same as a charge) and then full to a full charge cycle. In order to maintain the proper state of battery charging, please ensure that at least once a month after the charging cycle, that is, the battery is full and then the power is completely exhausted, ipad mini3 you only need to fully charge and discharge once a month or so.