Generally, the charging pile will have a two-dimensional code, scan the code with the mobile phone to download or pay attention to the public number, and register and log in. Plug the charging cable on the fast charging pile into the connection port of the electric vehicle, and be sure to plug it tightly. After plugging in the charging cable, it shows that the electric vehicle is successfully connected to the charging pile, and click the scan code on the phone screen to charge or the serial number to charge.
< br >
After charging, click Stop charging in the service number, and then unplug the charging cable, charging is complete.
< br >
5. Some charging piles are charged by card. Find the magnetic card induction area on the right side of the charging pile display, and swipe the card to charge automatically
1. Plug the grounding connector into the 220V socket
< br >
2. Plug the charging gun into the ground connector and turn on the power button
< br >
3. Charge the C11 with the charging gun
< br >
The car charger can be charged directly into the 16A air conditioning socket at home, and the common sockets at home are generally 10A and 16A
1. Shift to n gear.
< br >
2. Press the button at the lower end of the AC charging cover to open the charging cover (the AC slow charging port is smaller than the DC charging port).
< br >
3. Plug in the charging gun and hear a click, indicating that the connection is successful.
< br >
4. Turn on the power switch and charge the Bluetooth key switch. At this point, the center control screen displays charging. At the same time, the three indicators of the charging port of the tram flash green, as does the charging pile.
< br >
5. The center panel displays charging complete. At this point, there is an unlocking charging gun in the upper right corner of the center panel. Click the unlock button and pull out the charging gun.
< br >
6. Cover the charging cover and vehicle charging cover (the cover cannot be opened when locking the car).