When the temperature is too high, the charging power will automatically decrease. All versions of Mi 11 charging temperature control is particularly strict, the temperature reached 36 degrees began to slow down 40%, normal to 9000ma, mobile phone temperature above 36 degrees is only about 5000 ma. The Mi 11Pro battery is equipped with a large battery capacity of 5000mAh and supports 67WFast charge, 67W wireless charging, support 10W reverse charging.
Must use the mobile phone original wireless charging can be faster. The charging effect of the mobile phone depends on the charger, but also related to the charging cable and the mobile phone. In terms of chargers, the general charger will have a built-in smart chip, which can identify the current and voltage required to charge the phone, and then adjust the current and voltage within the safe range of the phone.
Wireless charging has a requirement for the distance between the mobile phone and the wireless charging panel, so a very thick mobile phone protective case or back bracket will cause the distance to exceed the effective receiving range or "virtual.The phenomenon of filling. The thickness distance/charging Angle/metal barrier will have a great impact on the wireless charging experience.
Confirm that the original charger is used. Does the mobile phone itself support wireless charging? If the mobile phone itself does not support wireless charging, it is useless to take what wireless charger! Make sure to use the original charger. Turn on the fast charging switch of the phone. Check whether the system has a new version and upgrade the system. If not, please back up important data (contacts, SMS, photos, etc.) and try to restore factory Settings.
Mi 11 broken charging is slow, it may be the use of non-original charger. SuggestionUse the original charger, in addition, you need to charge in a low temperature environment, if you charge in a high temperature environment, the phone in the self-protection function will automatically reduce the charging speed to prevent overheating.
Mi 11Pro supports 67W wireless super fast charge, but the wireless charger needs to be purchased separately. This network speed if you want to open, of course, it is OK, it is just a mode, and it can be used normally after it is opened, and it does not affect other effects. You can set the speed mode switch to open on the Settings page through the millet phone function. Wireless reverse chargingThe power needs to be turned on in the phone.
1, several factors affecting the wireless charging speed: power plug power, power cord, wireless charger power, mobile phone wireless charging receiving power, mobile phone shell, mobile phone bracket. Now the wireless charger technology has been very mature, product quality stability is also very high, so when there is a problem, we should first check to eliminate the above problems, will save more time and trouble.
2, from the mobile phone itself, there is also a system to adjust the control circuit inside the mobile phone, which can play a protective role in some overcurrent and overvoltage. In the same way, the data cable is also like this, high-quality charging cable can play a charging role, and inferior charging cable will cause mobile phone charging damage.
3, when the temperature is too high, the charging power will automatically decrease. All versions of Mi 11 charging temperature control is particularly strict, the temperature reached 36 degrees began to slow down 40%, normal to 9000ma, mobile phone temperature above 36 degrees is only about 5000 ma. Xiaomi 11Pro battery sideStandby battery capacity 5000mAh large battery, support 67W fast charging, 67W wireless charging, support 10W reverse charging.
4, this is the mobile phone in the use of high-energy applications, mobile phone background running too many applications, mobile phone function opened too much or mobile phone hardware problems caused. Temporarily use applications with high energy consumption. Close the application running in the background of the phone. Turn off functions you don't need on your phone. Mi 11 charging speed: from 1% to 55% in 15 minutes.
5, place the phone on the wireless charger, ensure that the contact between the phone and the wireless charger is good. nowThe screen of the phone will display the "Charging" prompt, indicating that wireless charging has been turned on. It should be noted that the power supply of the wireless charger needs to be plugged into the power socket, otherwise it cannot be charged. At the same time, the distance between the wireless charger and the mobile phone can not be too far, and it is generally recommended that the distance does not exceed 5mm. The above is the opening method of millet wireless charging.
is Mi wireless charge off , full will definitely stop smallMeter wireless charge off , and the battery also with a protective board Millet wireless charge off , full Millet wireless charge off can no longer be charged in. The wired charging head output must be connected to the charging line to the wireless base input, and then the wireless reception is converted to the internal charging of the phone. It is better to directly plug the fast charging head charging line into the mobile phone input port. Wired charger equipment is indispensable, but also add the base, built-in wireless charging, slow, low efficiency, heat.
Mi 12 automatically turns off and starts for wireless charging