1. Remove Huawei P40 wireless charging mobile phone protection caseRemove the hard plastic plate on the inside of the protective shell, and the center position is a wireless charging receiving coil. Next to the coil is a black circuit board for wireless charging reception. The position of coil and circuit board inside the protective shell are hollowed out to reduce the thickness. Remove the coil and PCB board, and you can see that the component surface of the PCB board is coated with silicone heat conduction.
2. Huawei p40 screen is made of aluminum-silicon glass, which has high strength. However, the mobile phone screen is not a fall-resistant/non-slip product, and the damage brought by different falling heights, angles and ground topography to the mobile phone will be different, it is recommended to film the mobile phone. But Huawei p40 random stickersIs a layer of TP protective film, this protective film belongs to the plastic material, attached to the outside of the screen, can protect the screen from being scratched, but can not prevent the screen from breaking, it is recommended to change to a more fall-resistant tempered film.
3, check whether the mobile phone charging interface is blocked by foreign matter, mold, corrosion, internal connection damage, etc., if there are such phenomena, it is recommended to the nearby customer service center for cleaning and testing. Please cross-verify that please replace the charger and data cable that can be charged normally, and check whether the charger and data cable are faulty. If the charger and data cable are normal, the phone is still unable to fast charge, it may be a mobile phone fault.
1, green magnetic wireless charging mobile power disassemble the body shell, the edge of the buckle package. The PCB board is fixed with screws, the wireless charging coil is fixed on the battery core, and is covered with foam protection. A thermistor is fixed on one side for temperature monitoring. Take out the PCB board and electric core, the body shell is affixed with protective foam, the corresponding circuit board and electric core junction is provided with an isolation board.
2, Green Link MFi certified 10000mAh two-way fast charge mobile power supply This mobile power supply stands out with its exquisite design. It uses PC flame-retardant material, the shell lines are rounded, the laser engraving texture adds a touch of science and technology, and the UGREEN brand Logo stands proudly. There are four LED power indicators on the front, which are clear and intuitive, and the power button on the side is convenient to operate. The Lightning output line is cleverly designed and stored in the internal cable slot, which is practical and neat.
3, the power absorption treasure is the magnetic charging treasure and the magnetic charger, such as the green linkMagnetic power bank is good. Green Link Three-in-one MagSafe magnetic wireless charging Bank is a three-in-one MagSafe magnetic wireless charging bank, using Apple's ATL battery, providing a strong magnetic design. Of course, the wireless cable dual mode fast charging design, plus can be transformed into a mobile phone stand, used to charge while chasing the drama. Wireless charging provides 10W, 5W, 5W charging.
4, Looking for an iPhone 14 charging partner? Green Link new magnetic charging treasure not to be missed! UGREEN, a well-known domestic digital brand, launched a new magnetic charging bank, designed for iPBuilt by the hone 14, it is undoubtedly the right-hand man for its endurance. This charging bank built-in Apple factory magnetic core and battery core, capacity of 10000mAh, can be charged for three devices at the same time, efficiency and practicality. Green Link's charging bank focuses on seamless fit with the iPhone.
5, Green link magnetic wireless charging bank 20W fast charge for you to seek more compatibility, Green Link this charging bank to meet the needs of the people. (A new choice for domestic brands, designed for domestic mobile phone brands...) This charging bank sets magnetic mobile power and wireless charging in one, with the release and charge, and>
1, Millet 55W vertical air-cooled wireless charging using PC flame retardant material plastic shell, fuselage edge clear end corner arc transition, support board is black, base sandblasting treatment is gold. From the front, the front end of the base is equipped with LED indicators, and the support board is layered above and below, using different designs. Indicator light is green when working.
2. Conclusion: Millet vertical air coolingWith its small size and large output characteristics, wireless charging has become a highlight of my recent purchase. The following is an intuitive introduction to this product: Unpacking experience: / Millet vertical air-cooled wireless charging 30W in white transparent plastic packaging, visible at a glance. Its simple and generous orange-red packaging box contains the main body, data cable, charging head and manual, reflecting the efficient style of Xiaomi.
3, compared with the common 10W wireless charging technology on the market, Xiaomi's 30W wireless flash charge can charge half of the 4000mAh battery in 25 minutes, achieving the high of "wireless beyond wired"Yes. Xiaomi's vertical air-cooled wireless charge 30W is cleverly designed with an ergonomic tilt, which is convenient for users to operate while charging, and the built-in ultra-quiet fan can effectively actively dissipate heat, improving the comfort of the charging process.
4, among them, Xiaomi released the vertical air-cooled wireless charge 30W, with its power output of up to 30W, breaking the limitations of traditional wireless charging. It follows the Qi charging standard and is highly compatible, regardless of whether your device supports it or not, it can be easily handled.
5, Xiaomi not only launched 30W super wireless flash charge, but also released the first eye-catching vertical windCold wireless charging accessories, power up to 30W, using Qi charging standard, with extremely high compatibility, wireless charging performance to a new height.
1, ①, about the above MDY-08-EV model of the charger DC output is: 5V/2A. ②, about the above MDY-11-EM charger DC output is: 5V / 3A,9V / 23A, 12V / 67A, 10V / 25A. 3, to the above two charger models are different, the voltage, current and power of the two chargers are different.
2, to the MDY-08-EV and MDY-11-EM, are representative of the charger model, for example, MDY-08-EV original charger DC output: 5V/2A. The MDY-11-EM charger DC output is: 5V/3A, 9V/23A, 12V/67A, 10V/25A. So, these two different models of chargers, pleaseThe numbers are also different.
3, MDY-08-EV and MDY-11-EM are two different charger models. For example, the original charger of the MDY-08-EV has a DC output of 5V/2A, while the DC output of the MDY-11-EM charger includes several parameters such as 5V/3A, 9V/23A, 12V/67A and 10V/25A. Therefore, the two models of chargers are different in terms of parameters. The above information is for reference only.
4, the appearance is not the same mdy08eh and es are respectively the charger of Mi 5 and Mi 6They are slightly different in size, the former is slimmer in size, the latter is short and thick in size, and the two are similar in volume. mdy08eh is a black color, and it only has one color, black. The mdy08es has two colors, white and gray, the bottom is gray, and the top half is white.
5, the mdy08ev parameter is the output specification is 5V2A10W, the input is 100 to 240V wide voltage. In addition, the appearance of the charger has changed from the previous black to the gray and white design, and the volume is smaller, the style is more simple and fashionable, and it is printed with a milletlogo, a coin slightly larger than $1.
6, the model code is to distinguish between different voltage levels, but the difference is not big, and now the fast charger era is basically shared.
2. The steps to disassemble the MG 6 wireless charging board are as follows: First, unscrew the fixing screws at the four corners of the panel and remove the shielding cover plate on the front of the wireless charging board. Shield cover plate back edge exposed copper, black oil insulation in the middle, screen printing PCB-01. The shielding cover plate is made of PCB and has shielding copper foil on it to reduce electromagnetic radiation interference. Inside the aluminum shield case are three wireless charging coils, which are fixed to the shield of the PCBA.
3, put the mobile phone with wireless charging function on the wireless charging board. The position should be placed, you can charge, pay attention to some wireless charging panelsThe supported mobile phone model is different, to choose a wireless charging panel according to your mobile phone model, currently does not support remote charging, may reach this technology in the future, what is wireless charging technology can be remote wireless charger, this charger contains a transmitter with a plug.
4, the use of MG 6pro wireless charging is to fix the car wireless charger to the appropriate position in the cab, and connect the data cable connector of the wireless charger to the cigarette lighter interface of the car. The other end is connected to the wireless charger, and after fixing the wireless charger, ensure that the wireless charger will not slip offUse it often.
5, for example, the cover of the central control instrument panel of the second generation is gone, and there is a wireless charging board and a double-layer central armrest area design. For example, the full LCD dashboard such as electronic file handle such as dashcam driving assistance assembly such as reality AR such as racing seats. The third generation MG6 can always give people unexpected satisfaction in the details, without being grandiose.
On October 10, Xiaomi officially released this new mobile power product - Xiaomi Wireless charging Treasure youth version 10000mAh. Compared with the old Xiaomi wireless charging treasure 10000mAh currently on sale, the overall appearance design of the Xiaomi wireless charging treasure youth version has changed little, and the color has been increased to black and white, which is more young and fashionable. The material of the youth version of the shell has been changed from metal to plastic, and the function has been slightly reduced, so the price has been reduced by 20 pieces.
Compared with the 10000mAh wireless charging treasure currently on sale, the youth version is basically consistent in appearance design, but it has added blackWhite two color choice, more young fashion sense. The shell material is changed from metal to plastic, and the function is slightly reduced, so the price is reduced by 20 yuan.