1, why does the vacuum cleaner have no suction? It is likely that the dust collecting interface of the vacuum cleaner or the micro-hole of the dust collecting bag is blocked. This is where you just need toRemove the vacuum cleaner, shake off the dust in the hose, and then clean the blockage at the suction nozzle or dust bag, or replace it with a new dust bag. It may be that the dust filter bag is covered with dust leading to no suction, and the filter has a lint filter bag and is easy to be covered with dust or blocked.
2, machinery in factories and enterprises, because there is no special cleaning, the porosity of the dust grid is blocked for a long time. When the parts are not well maintained, the hose, square mouth, steel pipe, joint, etc., appear wear, rupture, porosity. These have a lot to do with suction. In some uneven ground and carpet encountered some relatively heavy or great difficultiesSuction, at this time also need strong suction.
3, the first may be the power supply problem, if it is a wired vacuum cleaner may be the plug is loose, check the plug, or change a jack to try. The cordless vacuum cleaner may be too low, or the battery is burned out and aging, charging and replacing the battery can be done. The second could be a blockage problem.
4, filter problem Dyson vacuum cleaner filter is an important part of ensuring its normal operation, if the filter is not cleaned or replaced in time, it will lead to reduced suction or instability. We should clean or replace the filter regularly.
5, check whether the drain pipe is covered tightly, because no cover or no cover will lead to insufficient vacuum suction. (3) Remove the hose and stainless steel bend from the vacuum cleaner square automatic card and flush against the faucet. If the water can be discharged normally, the hose and stainless steel bend are smooth. (4) Whether the large dust scraper is blocked by large debris.
1. Conclusion: Through realityThe iWALK Beetle Magnetic Wireless Charger is really a practical and excellent charger, compared to the MagSafe. The following is a detailed experience to share. First, the packaging design of the iWALK Beetle is simple and environmentally friendly, in line with the modern aesthetic. What makes it different is the additional ring design, which doubles as a stand function, providing convenience for use.
2, iWALK Beetle magnetic wireless charging, not only can charge, but also act as a ring and bracket, many functions. This is an innovative magnetic ring wireless charge. More stable magnet, faster charging. Apple iPhonThe e12 series is supported for easy access to the ultimate experience. So far, the only magnetic wireless charge with a ring. It is no longer the same magnetic charging, increasing the ring, more convenient to hold and more recognizable. 3, iWALK Beetle magnetic wireless charger appearance as a whole round design, the main body of the shell is white, look and feel very simple and generous, and iPhone12 mobile phone is also very good, very nice. iWALK Beetle Magnetic Wireless charging has 5 meters of charging cable, to meet daily needs, do not worry about the cable is not enough, to achieve the need to charge anytime, anywhere.
In terms of function, ZAGG's magsafe wireless magnetic chargers support the "shell charging" function, but the premise is that the thickness of the phone case cannot exceed 3mm, otherwise it will affect the charging efficiency and magnetic strength. Wireless charging is not enough My advice is that if you want to use magsafe magnetic charging for a long time, it is best to startA magsafe compatible phone case so suction is not an issue Wireless charging is not enough .
When it comes to the most portable wireless charger, then my big ZAGG portable travel magsafe charging pad must be in the top, not only convenient to store, but also can charge iPhone, Airpods and Apple Watch at the same time, which is very efficient. Of course, the high efficiency of maintaining stability is only one of the highlights, and the coolest is the folding design bag combination, which is the same size as the ordinary wash bag, but solves all the portable charging problems.
iPhone SE3 does not support magsafe magnetic charging, but ZAGG wireless charging is not enough Their home magnetic accessories can be used, because the iPhone SE3 does not support magsafe, but can be charged wirelessly. ZAGG's magsafe accessories can be compatible with the Qi protocol, and you can experience almost native magnetic charging experience with the "magnetic sticker" they sent, not only the iPhone SE3, but also Android phones compatible with Qi wireless charging.
MeThe 2-in-1 wireless charging stand and the wireless magnetic charging bank are both ZAGG, and the wireless magnetic charging bank is mainly used for Samsung mobile phones. There is a magnetic sticker in the package, which can be used on the back of Android phones. It should be noted that your Android phone should be compatible with the Qi wireless charging protocol, since your phone supports it, you can rest assured to start. It's all on Baidu.
I use ZAGG their home magnetic charging bank, I chose the 5000mAh that is very portable, basically stuck to the back of the iPhone every day, heavy use of a day is no problem. As for the difference from regular wireless, magneticSuction is definitely a lot of points for the experience, if there is no magnetic suction, you have to press on the charging bank with your hand, the experience is very bad.
If your phone is an iPhone that supports magsafe, the first choice is ZAGG's magsafe magnetic charger, which can not only support 15W fast charge, but also feel comfortable while playing. However, nothing is absolute, if your use scenario is the kind of charge with the release, ZAGG 10W wireless charging board is also a good choice, because there is no magnetic absorption, short time charging is more convenient.
2, Wireless suction is not enough You can first use a softer method, first communicate with him, the family is two people, can not use the idea of their own home to live. Used to have a mother in their own home to help clean up everything, big everything, now married, you have to tell him can not be in this. Because now it is the two of you who are living together and sharing housework, housework is definitely not the responsibility or obligation of either party. wireless suction is not enough ! Each change, however, failed to achieve the kind of perfection Evan wanted. The last time Evan read the journal, things in his memory didn't go the way Evan had planned.
2, Watts or 10 kpa. The suction of the household vacuum cleaner should be maintained at least 100 watts or 10 kpa, which can clean mites, most of the accumulated dust, small particles of food residue, etc., and the suction range is enough to meet the basic household cleaning needs.
3, the vacuum cleaner 15000pa is a large suction. Common household vacuum cleaners are around 13000pa. The power of the vacuum cleaner is 400-1000W or higher, and the power of the portable vacuum cleaner is generally 250W and below. Vacuum cleaner can remove dustThe main reason is that its "head" is equipped with an electric extraction fan.
1, insufficient suction filter needs to be replaced or cleaned. Check the user manual for instructions on how to clean or replace the filter. The suction head or pipe is blocked. Check the suction heads and pipes for blockages and clean them. The gap between the suction head and the ground is too large. Adjust the height of the suction head to ensure that it fits tightly to the ground. The motor is faulty. Excessive noise suction head or pipe blocked.
2, generally a dust collection bagThere's too much dust in there. Clean the trash dust in the dust collection bag before or after each use. If there's no dust. It's just the motor.
3, the first may be the power supply problem, if it is a wired vacuum cleaner may be the plug is loose, check the plug, or change a jack to try. The cordless vacuum cleaner may be too low, or the battery is burned out and aging, charging and replacing the battery can be done. The second could be a blockage problem.
4, check the vacuum cleaner inside the dust compartment, dust bag is correctly installed, check whether there is too much dust need to be cleaned. (2) Check whether the drainage pipe isCover tightly, because no cover or no cover will lead to insufficient vacuum suction. (3) Remove the hose and stainless steel bend from the vacuum cleaner square automatic card and flush against the faucet. If the water can be discharged normally, the hose and stainless steel bend are smooth. (4) Whether the large dust scraper is blocked by large debris.
5, there are several possibilities: telescopic pipe, hose blocked with foreign matter. The telescopic tube can be visually seen that it is indeed difficult to remove foreign bodies from the hose. The filter sponge does not clean up the motor abnormality for a long time, which will produce a lot of noise. You should first identify which part of the noise is coming from, and if it's none of those things, you