The answer is as follows: 1. First, lift and support the vehicle to avoid accidents.
2. Remove the bumper, water tank, fan and radiator from the front of the vehicle for better access to the engine bracket.
3. Using a wrench or torque wrench, remove the bolts from the engine support and remove the support from the engine.
4. When installing the new engine bracket, align it with the engine and secure it with bolts.
5. Reinstall the radiator, fan, water tank and bumpers.
6. Finally, start the vehicle and check whether the engine bracket is correctly installed and whether there is abnormal noise or vibration.
Locate the hood switch located below the left side of the main driver 2 Open the lift switch through the hood and turn it on.
In the early stage, the engine cover will open a slit, reach into the slit of the front cover to find a handle, and then press and push the handle to open the engine cover.
Open the same through the underfoot handle, find the left handlebar under the driver's side, pull the handlebar twice, open the hood. Support the hood of the BMW with support rods to ensure that the support is strong and avoid danger.
First of all, it is necessary to remove the components connecting to the outside of the engine, select the triangle point, support the tripod, and remove the nut on the fixing screw that fixes the engine in place.
Hand pull the pulley movement on the trike, so that the engine gradually move up, when the engine frame gasket can be moved, stop the pulley operation, take out the old gasket, replace the new gasket, and finally reset and install the engine fixing nut.