1, after opening the hood, in the internal test of the two headlights, there is an iron hook, in the back of the headlight, there is a place to lock the plastic screws of the headlights, turn off the two plastic screws behind the headlights, store it well, and then pull the iron hook outward to the end, the headlights naturally come out;
< br >
2, after the headlight is removed, it will be found that the back is dragged by the headlight harness, the headlight harness is fixed through the card, touch the bottom of the joint, you can find the button, press down can exit the harness;
< br >
3, after removing the headlight, observe the base of the headlight and its determination method, the fixed guide rail in the middle is used to slide into or slide out of the headlight, the iron hook on the right is the locking device, pull out the headlight, and push it to lock the headlight;
< br >
4. After unplugging the wiring harness, the headlight bracket of the car will come down.
1. The BMW headlight bracket can be removed. 2. The reason for removing the BMW headlight bracket is that the headlight may need to be replaced or repaired, or other related maintenance work. The headlight brackets are usually attached to the body by screws and need to be removed for repair or replacement. 3. To remove the BMW headlight bracket, you first need to open the hood of the vehicle and find the fixing screws for the headlight bracket.
Loosen the set screw by turning it counterclockwise using an appropriate tool, such as a wrench or screwdriver.
Then, carefully remove the headlight bracket from the body.
When carrying out this process, care needs to be taken not to damage other parts and to ensure safe operation.
A: Here's how
1, first remove the screws under the front bumper and then open the front cover, open the front cover can not rush to remove the screws.
2, and then look at the headlight installation screws, the general vehicle is to remove two headlight screws, there are three screws under the headlights to fix the bumper on the keel of the car. 3, finally remove a few screws above the keel to safely remove the bumper.
4. Pay attention to the lights and lines above the bumper when dismantling. Take out the wires and lights first and the last thing you take out is the safety